Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Auxiliary hydraulics for 3400


 
Post new topic    
View previous topic :: View next topic  
Author Message
85burbanator
Regular


Joined: 07 Feb 2016
Posts: 155


Report to Moderator

PostPosted: Sun Dec 31, 2017 6:57 pm    Post subject: Auxiliary hydraulics for 3400 Reply to specific post Reply with quote

I know they have the kits that mount under the seat to add smaller hydraulics ran off the tractor pump. My book is buried but what psi do those run at? My loader fell off is blocks and sank in the ground during a wet month while the tractor was in the garage getting work done. It's now frozen in the ground and buried in snow. My jd 750 won't lift it with a boom on the 3pt and my buddies skid steer is tied up with snow removal until the season ends.

I'm thinking of fabbing up a truck plow to the front but complete ones are expensive this time of year. I got a line on an older blade with trip springs and lower carrI age but no pump/controlls. How hard would it be to plumb some lines for mark and ad a cylinder to lift/lower and tie in the angle culimders? May just add a winch and drill some holes to manually angle the blade, that's the cheapest and easiest route
 
Back to top
View user's profile
85burbanator
Regular


Joined: 07 Feb 2016
Posts: 155


Report to Moderator

PostPosted: Sun Dec 31, 2017 6:59 pm    Post subject: Re: Auxiliary hydraulics for 3400 Reply to specific post Reply with quote


Edit: I meant to say, plumb some lines to the front and add a lift cylinder. Dang phone changes the right words and keeps the wrong ones
 
Back to top
View user's profile
Sean in PA
Tractor Guru


Joined: 27 Feb 2008
Posts: 6745
Location: Southeast PA

Report to Moderator

PostPosted: Mon Jan 01, 2018 7:24 am    Post subject: Re: Auxiliary hydraulics for 3400 Reply to specific post Reply with quote

The pump itself should have made close to 3000 psi when new. The relief valve in the 3 point circuit should be set to around 2000 to 2200 psi.
 
Back to top
View user's profile
85burbanator
Regular


Joined: 07 Feb 2016
Posts: 155


Report to Moderator

PostPosted: Mon Jan 01, 2018 11:04 am    Post subject: Re: Auxiliary hydraulics for 3400 Reply to specific post Reply with quote


Thank you for the response. I decided to pass and hold out for a complete unit. Should be plenty getting unloaded after the season ends for fair prices.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters