Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Case 450 dozer brakes


 
Post new topic    
View previous topic :: View next topic  
Author Message
wally b
Regular


Joined: 13 May 2008
Posts: 254


Report to Moderator

PostPosted: Wed Feb 07, 2018 2:34 pm    Post subject: Case 450 dozer brakes Reply to specific post Reply with quote

Case 450 dozer left brake not working and I don't think it has worked for a while. I got this dozer recently. The hydraulic part of the braking system works and so does the slave cylinder. It de-clutches the drive transmission but the left brake wont engage even with the adjusting screw fully tightened. I think the problem is in the braking housing within the brake shoe mechanism. Any thoughts or advice on taking apart? Any thoughts on other possibilities or common causes of them not working?

I cnat tell from the parts diagram how the brake actually slows the track--it does not show a shaft that it works on.


 
Back to top
View user's profile
AJ.
Tractor Expert


Joined: 20 Oct 2007
Posts: 1823
Location: UK

Report to Moderator

PostPosted: Thu Feb 08, 2018 2:15 am    Post subject: Re: Case 450 dozer brakes Reply to specific post Reply with quote

You will probably need to remove the brake housing,it may be the linkage has come undone inside,or oil has leaked in,the spline on the actuator shaft could be stripped,once the slave cylinder is working the trouble is inside the housing.
AJ
 
Back to top
View user's profile
Case Nutty 1660
Tractor Guru


Joined: 08 Mar 2011
Posts: 13703


Report to Moderator

PostPosted: Sun Feb 11, 2018 7:15 am    Post subject: Re: Case 450 dozer brakes Reply to specific post Reply with quote

If I might add to AJ's comment,, if it has stuck at some point and gotten hot it will take the temper out of the springs and they will be "long" and not re-track the way they need to, this also most times takes the chrome off the actuation balls so they need replaced as well, I have had some luck if they are not oil soaked to buff the glaze off so they "grab" well again
cnt
 
Back to top
View user's profile
Rpatterson
New User


Joined: 04 Mar 2018
Posts: 1


Report to Moderator

PostPosted: Sun Mar 04, 2018 12:08 pm    Post subject: Re: Case 450 dozer brakes Reply to specific post Reply with quote

I've been reading the post and decided to repair my Case 450 brakes too. Removing the housings and cleaning things up. Appears the seal has been leaking fuild into the brake
housing for sometime, guessing the shaft seals are bad. Any advice on removing the brake mounting plate?? My Case manual doesn't contain any info and can't fiqure it out.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters