Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

450 C tracks


 
Post new topic    
View previous topic :: View next topic  
Author Message
Hiddenvalley627
Regular


Joined: 28 Oct 2016
Posts: 20


Report to Moderator

PostPosted: Sat Jul 21, 2018 12:24 am    Post subject: 450 C tracks Reply to specific post Reply with quote

What size tracks and pads are needed for a 450C. Serial number 289711 T. Any advice on where to find a good used set?
 
Back to top
View user's profile
Jim.ME
Regular


Joined: 02 Mar 2018
Posts: 133
Location: western Maine

Report to Moderator

PostPosted: Mon Jul 23, 2018 5:14 am    Post subject: Re: 450 C tracks Reply to specific post Reply with quote


I don't really understand what you are asking by what tracks fit a 450C. Pretty much JD 450 tracks are JD 450 tracks, occasionally track from another brand might be close enough in pitch, rail height, width, etc. to fit but finding which ones (if any) will fit could be a project. There may be some changes in pitch from the earlier 450 models to the later 450 models which may rule some of the later ones out. Finding a good used set of tracks and pads will be a challenge, most are run to the end of their life before replacement.

If you don't know about on line access to the John Deere parts books search JDParts:Homepage . Once there you will see a box where you enter your model number and get access to the parts book where you can see the track options.

By the parts book 36 links is common, but count the links in your existing chains. I'm not sure but it might have more if a long track version was available.

16" wide, open center, single grouser shoes were common on dozers, again measure your existing shoe width as there were width and type options.

Various vendors sell aftermarket tracks and shoes, as well as John Deere. The vendors will tell you what they have for options that will fit. You will need to decide on SALT (sealed and lubricated track) or plain track chain. You should plan on resealing track adjusters, replacing sprockets, idlers and rollers as well, if they are not up to spec, or track life will be shortened.
 
Back to top
View user's profile
AJ.
Tractor Expert


Joined: 20 Oct 2007
Posts: 1807
Location: UK

Report to Moderator

PostPosted: Mon Jul 23, 2018 9:12 am    Post subject: Re: 450 C tracks Reply to specific post Reply with quote

The tracks that fit the 450C also fit from the 450 to the 555B,the dozer has a 36 link track chain,the loader 37,the track pitch is 6.29 inches, link height is 90MM, the bushing OD is 51MM, there are 5 single flange rollers on each side with one carrier roller,the shoes comes in 14", 16", 18" and 24",the shoe bolt size is 1/2",the info comes from the Draco catalogue,try places like machinerytrader.com under parts and dismantled machines,there are some new sets on ebay at the link below,go down the page and you will find them.
AJ
Tracks

 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters