Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

ib allis chalmer


 
Post new topic    
View previous topic :: View next topic  
Author Message
nhtractormd
Regular


Joined: 16 Nov 2005
Posts: 39


Report to Moderator

PostPosted: Mon Sep 17, 2018 6:12 am    Post subject: ib allis chalmer Reply to specific post Reply with quote

Hi all, I have purchased an IB in pieces from a salvage yard. When I saw it and realized what it was I had to save it, if nothing
else just for parts. After a year or so I decided to start rebuilding this tractor, in sorting through the parts i found that most
parts unique to the IB are there. My question is the clutch shaft that runs from the clutch shaft to the transmission is missing.
Is this shaft different from a regular B? Thanks
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 78305
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Mon Sep 17, 2018 7:45 am    Post subject: Re: ib allis chalmer Reply to specific post Reply with quote

I would think it would be the same as the B or the C. I have 2 parts Cs on hand so I may have one
 
Back to top
View user's profile
Dick L
Tractor Guru


Joined: 01 Sep 1999
Posts: 12782
Location: Edon Ohio

Report to Moderator

PostPosted: Mon Sep 17, 2018 8:23 am    Post subject: Re: ib allis chalmer Reply to specific post Reply with quote

It would be shorter! The coupler can be removed from the standard drive shaft and welded onto the shaft after being cut off to the proper length.
 
Back to top
View user's profile
Aaron SEIA
Tractor Expert


Joined: 16 Dec 2003
Posts: 1956
Location: SE Iowa

Report to Moderator

PostPosted: Mon Sep 17, 2018 1:16 pm    Post subject: Re: ib allis chalmer Reply to specific post Reply with quote

Get on www.AGCOpartsbooks.com Log in as a guest and search for "IB". You can view the parts manual and compare what will interchange.
AaronSEIA
 
Back to top
View user's profile
Butch(OH)
Tractor Expert


Joined: 19 Jun 2000
Posts: 3194


Report to Moderator

PostPosted: Wed Sep 19, 2018 4:17 am    Post subject: Re: ib allis chalmer Reply to specific post Reply with quote

As Dick said it is shorter than a B or C shaft but no biggie to modify to fit.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters