Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

580E Noise At Idle


 
Post new topic    
View previous topic :: View next topic  
Author Message
Part Time Pete
Tractor Expert


Joined: 26 Feb 2013
Posts: 1688


Report to Moderator

PostPosted: Tue Oct 02, 2018 4:21 pm    Post subject: 580E Noise At Idle Reply to specific post Reply with quote

I've got a 580E backhoe that seems to have developed a clatter at idle, that goes away as the rpm's go up. It sounds like it's coming from
the area of the injection pump but I'm not sure. Any thoughts or ideas?
Thanks
Pete
 
Back to top
View user's profile
AJ.
Tractor Expert


Joined: 20 Oct 2007
Posts: 1842
Location: UK

Report to Moderator

PostPosted: Wed Oct 03, 2018 2:09 am    Post subject: Re: 580E Noise At Idle Reply to specific post Reply with quote

Check the front engine mounting,if the rubber cushion has rotted away it can a hell of a racket,there is one on the front and two on the back,it is usually the front one that goes,it is not easy to fit it as you are limited the amount the engine can be raised but it can be done.
AJ
 
Back to top
View user's profile
Part Time Pete
Tractor Expert


Joined: 26 Feb 2013
Posts: 1688


Report to Moderator

PostPosted: Wed Oct 03, 2018 4:28 am    Post subject: Re: 580E Noise At Idle Reply to specific post Reply with quote

Thanks - I'll check it out
Pete
 
Back to top
View user's profile
greg oliver
Tractor Expert


Joined: 09 Nov 2013
Posts: 1642
Location: Worcester N.Y.

Report to Moderator

PostPosted: Sat Oct 06, 2018 11:57 am    Post subject: Re: 580E Noise At Idle Reply to specific post Reply with quote

Pete, You need to rescue this one! He had all new pins and bushings in boxes but needed the shuttle rebuilt. The shuttle sat on the work bench for years and was always going to be a rainy day project. My White has the same Cummins 4B 239 CID engine. Changed engine mounts on his Case 550G due to excess vibration as well that has the 4BT Cummins.


 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters