Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Deere pto guard


 
Post new topic    
View previous topic :: View next topic  
Author Message
07ketnec
New User


Joined: 16 Jan 2017
Posts: 9


Report to Moderator

PostPosted: Tue Oct 09, 2018 11:46 am    Post subject: Deere pto guard Reply to specific post Reply with quote

I'm looking at purchasing a 1957 Deere 620.
I unfortunately will not be able to see it in person, but only view it from the pictures online due to long distance.

I noticed on the rear it has the PTO flipper guard and not the tradition cover. Why did some tractors come with the flip cover and others had the
traditional shroud?
 
Back to top
View user's profile
MSM
Tractor Expert


Joined: 05 Jun 1999
Posts: 1885


Report to Moderator

PostPosted: Tue Oct 09, 2018 12:16 pm    Post subject: Re: Deere pto guard Reply to specific post Reply with quote

When new the tractor should have been delivered with both. The flip up guard would be raised up and held in place with the square pto cover when it was used. The square cover is probably in never-never land along with all the top links,3 point hitches,wheel weights,front weights, remote plugs and sway blocks that are never on the tractors when you buy them today
 
Back to top
View user's profile
Tx Jim
Tractor Guru


Joined: 14 Feb 1999
Posts: 25724
Location: N Central Texas

Report to Moderator

PostPosted: Tue Oct 09, 2018 12:31 pm    Post subject: Re: Deere pto guard Reply to specific post Reply with quote


Ditto new from factory tractor should have both pto guards.
 
Back to top
View user's profile
BushogPapa
Tractor Guru


Joined: 26 Dec 2001
Posts: 7911


Report to Moderator

PostPosted: Wed Oct 10, 2018 4:34 pm    Post subject: Re: Deere pto guard Reply to specific post Reply with quote


When Mounted plows were used on these tractors, the larger PTO shield had to be removed and the flipper allowed to drop over the PTO shaft..

If you didnt, you just may loose the large shield while plowing..

That is why they were made to be easilly removed..
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> John Deere All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters