Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Removal Of Rear Tire Mounted on 190XT


 
Post new topic    
View previous topic :: View next topic  
Author Message
FarmerHR
Regular


Joined: 30 Jul 2008
Posts: 488


Report to Moderator

PostPosted: Thu Oct 11, 2018 9:28 pm    Post subject: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

Need to remove the 18.4x34 eight ply tire mounted on an 190XT. The tire is very old and stiff and I think it may be the original tire. The bead is broken on both sides. Now I need to remove the tire from the rim.
I have put blocks of wood all around the inside and the front half of the tire to move the bead off the flat part of the rim. I have lowered the tractor so there is pressure on the bottom to push the tire up into the drop part of the rim on the bottom. I have been able to get about an eight inch section of the front bead past the outside of the rim at the top. It is really getting tough at this point to get more of the tire off. I would appreciate any help on how I should proceed. Also are there any lubricants that I should be using ? Would also like to hear any experiences you have had.
Thank you in advance for any help you can give me.
 
Back to top
View user's profile
smileykeith
Regular


Joined: 25 Jun 2006
Posts: 56


Report to Moderator

PostPosted: Fri Oct 12, 2018 1:33 am    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

If tire is junk a sawzall works great other wise i use dish soap for lub
 
Back to top
View user's profile
IA Roy
Tractor Expert


Joined: 22 Mar 2005
Posts: 1807


Report to Moderator

PostPosted: Fri Oct 12, 2018 11:35 am    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

Look on YouTube. Probably many videos on how to remove rear tractor tire. Breaking beads is the hardest part. Pretty easy after that. Easier for someone to show you than for me to describe how.
 
Back to top
View user's profile
shaun wallace
Tractor Expert


Joined: 11 May 2008
Posts: 2971


Report to Moderator

PostPosted: Fri Oct 12, 2018 4:44 pm    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

I take junk tires off with chainsaw. Cut about 2-3 inch from bead then usually bead will fall off. If not broke down use cutoff wheel to cut bead.
 
Back to top
View user's profile
Hurst
Long Time User


Joined: 16 Dec 2004
Posts: 931


Report to Moderator

PostPosted: Tue Oct 16, 2018 11:49 am    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

Do you have a bale spear for loader or 3pt? If so, I usually get the bead started over the rim where I can get the spear between the tire and rim ( ) and then put the tractor in reverse (so it pushes down on the spear and not pulling up) and slowly let it do the work. It should work just like a tire machine on a large scale. Also, did you pull the tube out yet? If you can get the tube out first, that will make sure it is not blocking the bead from dropping down into the drop area of the rim. It really should just come off as soon as the opposite end of the tire is in the drop section of the rim, just a matter of handling the weight and flexing the sidewalls to keep the tire coming off.

Hurst
 
Back to top
View user's profile
Dick L
Tractor Guru


Joined: 01 Sep 1999
Posts: 12866
Location: Edon Ohio

Report to Moderator

PostPosted: Wed Oct 17, 2018 2:03 pm    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

I just took one side off a few days ago to pull the tube out so it could be patched and videoed it. Some of it only. I thought I had posted but at 80 I might have thought I did and didn't. It is not a how to video by any means but how I did it.
Removed Inter Tube.

 
Back to top
View user's profile
hd6gtom
Tractor Guru


Joined: 20 Jan 2011
Posts: 4393


Report to Moderator

PostPosted: Thu Oct 18, 2018 6:34 am    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

I spent 22 years doing this. 1st thing, what are you using for bead lube? Dish soap isn't slick enough. Get yourself 2--30" tire irons, Ken Tool sells some good ones, some good bead lube, such as the stuff NAPA sells. Raise the tire off the ground, slick up the beads with plenty of lube and start prying it off the rim. If you don't have enough lube, you can bend the rim. Old tires are the hardest to remove, thus requiring lots of lube. It requires persistence and patience + brute strength.
 
Back to top
View user's profile
Dick L
Tractor Guru


Joined: 01 Sep 1999
Posts: 12866
Location: Edon Ohio

Report to Moderator

PostPosted: Thu Oct 18, 2018 12:12 pm    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

Good advise for someone that was not 80 years old with Neuropathy in all four limbs. I do not have the brute strength that I once had. I have tire irons and can not force the tire iron between the rim and bead. I can however get a screwdriver in with the use of a hammer when I can't with my bare hands. Also as you see I got it done. My video was not a how to do video and wasn't intended to be, it was just to prove with my problems I could still do what needed to be done by myself without help. I could tell you I did it but without the video most that know my problems would think I was not truthful. I still want to do the same stuff 20 years from now dontchyaknow. (:^D
 
Back to top
View user's profile
Brian Jasper co. Ia
Tractor Expert


Joined: 16 Dec 2007
Posts: 2945


Report to Moderator

PostPosted: Wed Oct 24, 2018 8:58 am    Post subject: Re: Removal Of Rear Tire Mounted on 190XT Reply to specific post Reply with quote

I second the Sawzall if the tire is scrap. Lots easier coming off that way.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters