Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

starting ac b


 
Post new topic    
View previous topic :: View next topic  
Author Message
johnmetcalf
New User


Joined: 03 Mar 2012
Posts: 18


Report to Moderator

PostPosted: Sat Dec 22, 2018 4:14 pm    Post subject: starting ac b Reply to specific post Reply with quote

tractor will only start with throttle completely closed, choke open. run good after started what could what could the problem be.
 
Back to top
View user's profile
cole in mo.
Tractor Expert


Joined: 29 May 2002
Posts: 1501


Report to Moderator

PostPosted: Sat Dec 22, 2018 4:19 pm    Post subject: Re: starting ac b Reply to specific post Reply with quote

Might naught be anything wrong, my 420 JD will only start with closed throttle, Allis D-14 will only start with 3 notches on the throttle and no choke.
 
Back to top
View user's profile
Brian G. NY
Long Time User


Joined: 02 Dec 2007
Posts: 882
Location: Upstate New York

Report to Moderator

PostPosted: Sun Dec 23, 2018 7:41 am    Post subject: Re: starting ac b Reply to specific post Reply with quote


Doesn't sound like a problem to me. The carb may be set a tad rich which could account for it.

When I start my WD, I have to have the throttle closed and the choke open as well.
The difference.....I have to crack the throttle and "feather" the choke immediately upon firing.
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 79588
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Sun Dec 23, 2018 8:44 am    Post subject: Re: starting ac b Reply to specific post Reply with quote

As with any engine they all have there formula where this and that has to be just so to start easy. So could well be just fine or it could be the carb is a bit rich. If I remember right the B does not have an adjustable main jet so maybe some one at some time drilled the main jet out bit when they where cleaning it so it now runs richer then it was made to be. If it starts easy and does not smoke a lot of black smoke I'd just live with it
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters