Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

white 2-155 parking brake


 
Post new topic    
View previous topic :: View next topic  
Author Message
Hustler1
New User


Joined: 18 Sep 2018
Posts: 18


Report to Moderator

PostPosted: Sat Dec 15, 2018 4:52 pm    Post subject: white 2-155 parking brake Reply to specific post Reply with quote

this also a white page? Parking brake linkage works but brake doesn't engage. Have not taken off shift cover yet. according to parts it is buried.anyone worked on this?
 
Back to top
View user's profile
rrlund
Tractor Guru


Joined: 21 Dec 2006
Posts: 41327


Report to Moderator

PostPosted: Sat Dec 15, 2018 5:58 pm    Post subject: Re: white 2-155 parking brake Reply to specific post Reply with quote

Ya,it's down there. The bolt that holds the pivot just screws in to the side of the casting. There's nothing that really holds it on the outside,so it can be prone to shearing off. I was just getting ready to start filling silo with my 135 when it broke. We ended up taking everything right out of mine. I put a bolt in the hole that the rod goes down through to keep the dirt out of it. It's so tight in there that I couldn't even get my arm down past the gears. My son got his down in there and got a wrench on the bolt at the bottom end of that rod. We put a bolt through the hole at the top and turned it up there with a pipe wrench.

Hope beyond all hope that that bolt didn't break in yours. There's no room to get in there to drill it out. Somebody told me that you have to pull the engine,pop out a soft plug and drill it out with a long left handed bit. I asked the mechanic at the old Oliver/White dealer about it and he said he never fooled with one,he just knew that in his opinion,everything else had to come out of the transmission to get to anything.


All the guts for mine are in a cabinet in the shop. Wish I had better news.



 
Back to top
View user's profile
rrlund
Tractor Guru


Joined: 21 Dec 2006
Posts: 41327


Report to Moderator

PostPosted: Sun Dec 16, 2018 7:38 am    Post subject: Re: white 2-155 parking brake Reply to specific post Reply with quote

To get to that to check it,pull up the floor mat,unbolt the cab floor and take it up. There's a dozen or so 3/8 bolts holding the transmission cover on. You'll have to take off a few hydraulic lines so you can lift the cover off.
 
Back to top
View user's profile
Hustler1
New User


Joined: 18 Sep 2018
Posts: 18


Report to Moderator

PostPosted: Sun Dec 16, 2018 4:40 pm    Post subject: Re: white 2-155 parking brake Reply to specific post Reply with quote

I have the engine and 3 speed out to rebuild 3 speed, going to pull cover off next when I get time , maybe later in the week, Thanks!
 
Back to top
View user's profile
Hustler1
New User


Joined: 18 Sep 2018
Posts: 18


Report to Moderator

PostPosted: Mon Jan 07, 2019 12:33 pm    Post subject: Re: white 2-155 parking brake Reply to specific post Reply with quote

Finally got cover off , pivot bolt is missing not sure if broke off , might have to look at tomorrow, got parts for 3 other tractors so they come first, thanks!
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters