Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

pods


 
Post new topic    
View previous topic :: View next topic  
Author Message
stonerock
Long Time User


Joined: 13 Oct 2014
Posts: 1333


Report to Moderator

PostPosted: Thu Jan 10, 2019 5:34 am    Post subject: pods Reply to specific post Reply with quote

9600 with 25' head hoe do I get the pods out of ben, there is just a lot of trash in ben settings are 450 cyl speed, 3 on the concave, fan 1050 wide open,sives front one shut, back are 3/8 and 5/8
 
Back to top
View user's profile
Uncle Du
Regular


Joined: 01 Apr 2015
Posts: 35


Report to Moderator

PostPosted: Thu Jan 10, 2019 6:32 am    Post subject: Re: pods Reply to specific post Reply with quote

I run a 9610 not sure if this will help mess with the concave that seems pretty tight open it up little by little to see if that cleans it up.
Slow the cylinder down also in small increments to not less than around 350
I think you are grinding everything up and overloading the sieves with trash.
The straw this time of year if dry or frozen will basically explode and disintegrate as it moves through the machine.
Just my thoughts.
 
Back to top
View user's profile
Uncle Du
Regular


Joined: 01 Apr 2015
Posts: 35


Report to Moderator

PostPosted: Thu Jan 10, 2019 9:17 am    Post subject: Re: pods Reply to specific post Reply with quote

I run a 9610 not sure if this will help mess with the concave that seems pretty tight open it up little by little to see if that cleans it up.
Slow the cylinder down also in small increments to not less than around 350
I think you are grinding everything up and overloading the sieves with trash.
The straw this time of year if dry or frozen will basically explode and disintegrate as it moves through the machine.
Just my thoughts.
 
Back to top
View user's profile
4520BW
Tractor Guru


Joined: 05 Aug 2015
Posts: 4850


Report to Moderator

PostPosted: Thu Jan 10, 2019 4:10 pm    Post subject: Re: pods Reply to specific post Reply with quote

When we ran a 96 with a 30' head we had to keep our ground speed up to keep cylinder full to thrash the beans.( should say in short beans) Might try to close the sieve a little more to send some more up the return. Beans this year seemed hard to get the pods out. The best luck I had was using the old 7720 with the hard surfaced trimpe bars and closing the bottom seivr all the way.
 
Back to top
View user's profile
Dugger
Long Time User


Joined: 04 Oct 2014
Posts: 692
Location: East central Illinois

Report to Moderator

PostPosted: Thu Jan 10, 2019 7:50 pm    Post subject: Re: pods Reply to specific post Reply with quote

[quote="CVPost-stonerock"](reply to post at 08:34:39 01/10/19) [/quote]

If you have your sieves closed the air can’t get thru
Top on 12
Bottom on 7
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Combines and Harvesters All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters