Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

310 in Oliver 77


 
Post new topic    
View previous topic :: View next topic  
Author Message
4010 puller
Long Time User


Joined: 27 Sep 2004
Posts: 1462


Report to Moderator

PostPosted: Wed Jan 09, 2019 8:39 am    Post subject: 310 in Oliver 77 Reply to specific post Reply with quote

Hi guys I?ve got a 77 needing an engine and found a cheap 310 gas, what?s involved in doing the engine swap?
 
Back to top
View user's profile
VicS
Tractor Guru


Joined: 12 Mar 2010
Posts: 4619


Report to Moderator

PostPosted: Wed Jan 09, 2019 11:48 am    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

My son put one in his. Had to make new steering rods. Just used 1/2 black pipe and 1/2" knuckles from a socket set. The water pump is to long. We took it off. Used a electric pump. All the bellhousing stuff will swap. Put a button clutch in. Clutch was a chevy or ford.
 
Back to top
View user's profile
535353m
Regular


Joined: 10 May 2014
Posts: 384


Report to Moderator

PostPosted: Wed Jan 09, 2019 1:04 pm    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

oil filter issues,but maybe the same as moving steering,- I think.most cut the fan shroud for water pump room
 
Back to top
View user's profile
Curt Smith
Regular


Joined: 02 Mar 2010
Posts: 44


Report to Moderator

PostPosted: Wed Jan 09, 2019 5:13 pm    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

You can run electric fan on front side to allow room for stock pump. I cut the shaft on pump off for more room. Cores are worthless. Spin on oil filter base is expensive but allow side shield to close. Single wire alternator is small and will fit easily. Most use 88 bell housing etc.
 
Back to top
View user's profile
4010 puller
Long Time User


Joined: 27 Sep 2004
Posts: 1462


Report to Moderator

PostPosted: Thu Jan 10, 2019 1:07 pm    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

What about main shaft from clutch to coupler, does it have to be shortened?
 
Back to top
View user's profile
535353m
Regular


Joined: 10 May 2014
Posts: 384


Report to Moderator

PostPosted: Thu Jan 10, 2019 4:31 pm    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

I think so.
 
Back to top
View user's profile
VicS
Tractor Guru


Joined: 12 Mar 2010
Posts: 4619


Report to Moderator

PostPosted: Fri Jan 11, 2019 4:23 am    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

He did use a 88 bell housing and flywheel I think. But coupling worked.
 
Back to top
View user's profile
4010 puller
Long Time User


Joined: 27 Sep 2004
Posts: 1462


Report to Moderator

PostPosted: Fri Jan 11, 2019 6:03 pm    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

Won?t the 77 bellhousing and clutch assembly also work?
 
Back to top
View user's profile
VicS
Tractor Guru


Joined: 12 Mar 2010
Posts: 4619


Report to Moderator

PostPosted: Sun Jan 13, 2019 9:57 am    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

I'm sure it will. He did use a super 77 tub.
 
Back to top
View user's profile
Cody
New User


Joined: 11 Feb 2015
Posts: 4


Report to Moderator

PostPosted: Mon Jan 14, 2019 8:48 am    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

just sell me the motor.
 
Back to top
View user's profile
VicS
Tractor Guru


Joined: 12 Mar 2010
Posts: 4619


Report to Moderator

PostPosted: Mon Jan 14, 2019 9:32 am    Post subject: Re: 310 in Oliver 77 Reply to specific post Reply with quote

Cody, A guy like you needs to start with a 426 block. LOL
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Tractor Pulling All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters