Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

WC vs WD for mounted corn picker


 
Post new topic    
View previous topic :: View next topic  
Author Message
vj
Regular


Joined: 08 Aug 2008
Posts: 31


Report to Moderator

PostPosted: Wed Jan 09, 2019 5:31 pm    Post subject: WC vs WD for mounted corn picker Reply to specific post Reply with quote

I have a 2 row tractor mounted AC corn picker that doesn?t seem to have a model number. I have the operators manual and it doesn?t give a model number either. The manual shows mounting instructions for both styled and unstyled WC tractors. My question is, would this picker fit on a WD?
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 80271
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Wed Jan 09, 2019 7:24 pm    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

WC and WD used the same engine but different transmissions and the WD had hyds where as the WC does not. I would think it would fit on both and the plus would be the hyds could be set up to do the lifting of the heads
 
Back to top
View user's profile
D beatty
Tractor Guru


Joined: 23 Jan 2013
Posts: 8448


Report to Moderator

PostPosted: Wed Jan 09, 2019 10:24 pm    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

You also have the hand clutch which come in handy in downed corn . You can stop the movement of tractor while picker can keep running.
 
Back to top
View user's profile
Traditional Farmer
Tractor Guru


Joined: 26 Apr 2007
Posts: 16793


Report to Moderator

PostPosted: Thu Jan 10, 2019 3:33 am    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

Probably a Number 33 picker,mounts would be different for a WD,they were quite a rig.
 
Back to top
View user's profile
tomstractorsandtoys
Tractor Expert


Joined: 30 Nov 2010
Posts: 3145


Report to Moderator

PostPosted: Thu Jan 10, 2019 6:06 am    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

If at all possible put it on the WD. You would have live pto which you will be glad for. You need to post on the Allis Chalmers Forum as there is lots more info there than here on pickers. Grandfather had a new styled WC with a two row picker. Tom
 
Back to top
View user's profile
JMS/.MN
Tractor Guru


Joined: 05 Mar 2009
Posts: 12535


Report to Moderator

PostPosted: Thu Jan 10, 2019 7:08 pm    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

Their was an early mounted picker that did not have a model number. That was not unusual. The model 33 came out later. In October 1951 Dad bought a WC with the early picker. I was 7 yo and the dealer drove it to our farm...he said I should tell Dad that the tractor hadno antifreeze in it.It had a lever on the right side (rear) that was used to adjust the picker height. The early picker should fit a WD. The fan assembly should fit under the gas tank and forward of the battery. It is driven by the belt pulley. The tractor pto is removed and the short shaft on the picker connects to the stub shaft of the pto gearbox.
 
Back to top
View user's profile
vj
Regular


Joined: 08 Aug 2008
Posts: 31


Report to Moderator

PostPosted: Fri Jan 11, 2019 1:35 pm    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

From what you?ve stated I would say I have the early unnumbered picker. Pictures in the book show the belt pulley drive and the hitch and pto shaft removal. The reason I question the mounting is that the tractor rear end housings are somewhat different and that makes me wonder if it will fit on the WD which would be my preference. Perhaps the picker (and manual) were made prior to the WD being made. That would answer why it isn?t shown in the manual but still leaves the question as to whether if will fit the WD. Thank you all for you help!!
 
Back to top
View user's profile
JMS/.MN
Tractor Guru


Joined: 05 Mar 2009
Posts: 12535


Report to Moderator

PostPosted: Sat Jan 12, 2019 7:44 pm    Post subject: Re: WC vs WD for mounted corn picker Reply to specific post Reply with quote

I can"t quite remember the brackets on the finals that held the rear of the picker, but the brackets that hold the elevator up would have to be different as well. The WC brackets attached to the tapped holes on top of the rear axle. Those holes are not on a WD final.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters