Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

JD Model PW Disk Harrow

Goto page 1, 2  Next

 
Post new topic    
View previous topic :: View next topic  
Author Message
Flyfisher
New User


Joined: 16 Jan 2019
Posts: 7


Report to Moderator

PostPosted: Thu Jan 17, 2019 5:54 am    Post subject: JD Model PW Disk Harrow Reply to specific post Reply with quote

Does anyone know where I can get parts for a JD Model PW Disk Harrow? I need a Bearing Housing, p/n C374-A. I'm hoping to find someone who has the part or someone parting out their machine. The bearing itself is available from Deere; the bearing housing is obsolete and not available from Deere.
 
Back to top
View user's profile
wvfarmboy
Regular


Joined: 16 Mar 2013
Posts: 279


Report to Moderator

PostPosted: Fri Jan 18, 2019 9:55 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

are u sure its P W not A W look on e bay
 
Back to top
View user's profile
NEMOfarmkid
Regular


Joined: 21 Sep 2017
Posts: 58


Report to Moderator

PostPosted: Fri Jan 18, 2019 10:59 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

Local salvage yard will be your best bet for the bearing housing
 
Back to top
View user's profile
Flyfisher
New User


Joined: 16 Jan 2019
Posts: 7


Report to Moderator

PostPosted: Fri Jan 18, 2019 4:43 pm    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

Yes it is a PW.
 
Back to top
View user's profile
Elton Fancher
Long Time User


Joined: 29 Nov 2007
Posts: 1026


Report to Moderator

PostPosted: Fri Jan 18, 2019 5:13 pm    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

I sent you a reply to your add. I had a PW years ago that needed a retainer and Deere could not get a new one, I never found a used one. I did some kind of engineering and got one off the AW to work, of course it did not look right. PW looks like an AW, and if I remember the rear gangs swivel, and have the chains, but the gangs are non-adjustable, and the entire disc is very heavily built. Very good cutting in hard ground. I have also owned an FWA, which is another oddball, and have one or two AW's junked now.
 
Back to top
View user's profile
Flyfisher
New User


Joined: 16 Jan 2019
Posts: 7


Report to Moderator

PostPosted: Fri Jan 18, 2019 6:08 pm    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

Thanks. I saw your earlier post and have thought about what you might have done to make KK5920 work in place of C374-A on the PW. The parts are similar in the interior and very different on the exterior as far as mounting. The KK5920 is available from Deere and C374-A is not. How did the KK5920 fasten to the AW? If I understood that I might understand what you did on your PW to make it work. I appreciate your help.
 
Back to top
View user's profile
Elton Fancher
Long Time User


Joined: 29 Nov 2007
Posts: 1026


Report to Moderator

PostPosted: Fri Jan 18, 2019 7:18 pm    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

An AW fastens with one long bolt all the way through and then one short one at bottom front I believe. I have several for the big axles, but you would need one for the 1 1/8 I think. You might have to weld a short bracket on, but I just forget what I did. Been 12 or more years. Not many PW's around.
 
Back to top
View user's profile
Elton Fancher
Long Time User


Joined: 29 Nov 2007
Posts: 1026


Report to Moderator

PostPosted: Sat Jan 19, 2019 8:01 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

You know, I was thinking, bushog brand and tuffline used retainers that hung in brackets like the PW. Might be worth checking into.
 
Back to top
View user's profile
Leroy
Tractor Guru


Joined: 09 Jan 1998
Posts: 18373
Location: Wapakoneta, Ohio

Report to Moderator

PostPosted: Sat Jan 19, 2019 8:30 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

I am not familuar with those disks. Did not even know a PW was made. I went to the John Deere online parts lookup site to see what it was or if that model even existed. But you should be able to go there and compair the parts page fron the PW with the AW to see if you can modify one to work. My Deere disk was a KBA There is a way to find out if that part number was used on more than just the one model and if it was you might be able to compair mountings to see what you can make work.
 
Back to top
View user's profile
Flyfisher
New User


Joined: 16 Jan 2019
Posts: 7


Report to Moderator

PostPosted: Sat Jan 19, 2019 10:18 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

Thanks Leroy. Glad to hear from you. Yes that is one of the paths I?m looking at now. Not as good as finding the right part but I may not have that option.
 
Back to top
View user's profile
Flyfisher
New User


Joined: 16 Jan 2019
Posts: 7


Report to Moderator

PostPosted: Sat Jan 19, 2019 10:28 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

Thanks Elton. I?ll give that a look. On the PW the bearing housing hangs from a yoke, you are correct. When you fixed your PW, do you think you modified that existing yoke or did you remove it and replace it with a completely different hanger/yoke?
 
Back to top
View user's profile
Elton Fancher
Long Time User


Joined: 29 Nov 2007
Posts: 1026


Report to Moderator

PostPosted: Sat Jan 19, 2019 12:25 pm    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

I believe I don't remember. I just know it worked. Good disc but they must have been pretty rare.
 
Back to top
View user's profile
Flyfisher
New User


Joined: 16 Jan 2019
Posts: 7


Report to Moderator

PostPosted: Mon Jan 21, 2019 4:34 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote


Elton- supposing I was able to figure out a way to mount a bearing housing from an AW.....Do you still have the AW?s you scrapped? In your earlier post you said ?have one or two AW's junked now?. If so, would you sell me a hsg off of one of them?
 
Back to top
View user's profile
Elton Fancher
Long Time User


Joined: 29 Nov 2007
Posts: 1026


Report to Moderator

PostPosted: Mon Jan 21, 2019 6:06 am    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

I have several bearings and housings for the 13 ft. and up models. They are made for an 1 1/4 axle. I believe they actually contain 2 bearings and are wider than the smaller. I believe your axle will be 1 1/8. I suspect your disc will be an 8 ft. or so, but you can let me know. I did have some of the smaller ones but I built an 11 ft. last spring and used up everything I had.
 
Back to top
View user's profile
VicS
Tractor Guru


Joined: 12 Mar 2010
Posts: 4662


Report to Moderator

PostPosted: Mon Jan 21, 2019 5:56 pm    Post subject: Re: JD Model PW Disk Harrow Reply to specific post Reply with quote

I have a 12ft 9" spacing 20" blades. I have robbed the blades. It also has dual tires. And is adjustable. I am located in SE Illinois. Don't know the Letters. But the bearings would be free. If I was going to use my disk I would replace JD bearings and standards with IHC ones. Bearings for IHC are 1/4 or less.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Implement Alley All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters