Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

605 into G


 
Post new topic    
View previous topic :: View next topic  
Author Message
mmkid
Regular


Joined: 28 Sep 2015
Posts: 22


Report to Moderator

PostPosted: Wed Mar 13, 2019 2:45 pm    Post subject: 605 into G Reply to specific post Reply with quote

Putting spark plug engine into G diesel. Running into a little problem, the area where the starter mounts is 1/2? thicker then that area on gas engine. So when diesel starter is mounted on gas engine, the starter gear is already in contact with the ring gear before the starter even engages. Doesn?t look like gas starter will work with diesel flywheel, so what are people doing to overcome this, making a 1/2? spacer plate to move starter out? Thanks
 
Back to top
View user's profile
mmkid
Regular


Joined: 28 Sep 2015
Posts: 22


Report to Moderator

PostPosted: Wed Mar 13, 2019 2:46 pm    Post subject: Re: 605 into G Reply to specific post Reply with quote





 
Back to top
View user's profile
mmkid
Regular


Joined: 28 Sep 2015
Posts: 22


Report to Moderator

PostPosted: Wed Mar 13, 2019 2:48 pm    Post subject: Re: 605 into G Reply to specific post Reply with quote

Putting spark plug engine into G diesel. Running into a little problem, the area where the starter mounts is 1/2? thicker on the diesel then that area on gas engine. So when diesel starter is mounted on gas engine, the starter gear is already in contact with the ring gear before the starter even engages. Doesn?t look like gas starter will work with diesel flywheel, so what are people doing to overcome this, making a 1/2? spacer plate to move starter out? Thanks
 
Back to top
View user's profile
T.R.K.
Tractor Expert


Joined: 14 Apr 2013
Posts: 1867


Report to Moderator

PostPosted: Thu Mar 14, 2019 5:39 pm    Post subject: Re: 605 into G Reply to specific post Reply with quote

I'm guessing the 605 didn't have a starter on it when you got it. I would think the best right thing to do is to find a 605 gas starter.

At this point, if you really want to mount the diesel starter in there, you need to know if the bendix on it has the same number of teeth as the correct starter for that gas flywheel. If not you probably will have issues with it either binding up or shucking teeth off the ring gear.

does your clutch mount up? That was a big issue for me putting a 403 in a UTS-diesel.

Also, will there be enough clearance in the bell housing for the engine to bolt up with the starter mounted on it. (That was another issue when putting a 403 in a UTS-diesel.)
 
Back to top
View user's profile
mmkid
Regular


Joined: 28 Sep 2015
Posts: 22


Report to Moderator

PostPosted: Thu Mar 14, 2019 8:25 pm    Post subject: Re: 605 into G Reply to specific post Reply with quote

Well I was planning on using the diesel flywheel,
I have read a few times to use that, it?ll be less
headache then mounting clutch gear from diesel
Flywheel onto 605 flywheel. And I just figured if using
The diesel flywheel then I probably should just
use that starter too, to like you said avoid binding.
I?m gonna bolt up engine, with flywheel mounted
but not the starter just to double check flywheel
Lines up, and go from there. I might see if I can
Take the 1/2 off the flywheel where the ring gear
mounts, and just simply slide that back further.
Thoughts? Thanks for your response. I put 403s
in 3 U?s. Those were easy compared to this,
I just welded 403 ring gear on stock U flywheel.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Minneapolis Moline All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters