Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

May not be a tool,,but worked good


 
Post new topic    
View previous topic :: View next topic  
Author Message
larry@stinescorner
Tractor Guru


Joined: 14 Nov 2009
Posts: 25280


Report to Moderator

PostPosted: Mon Jul 08, 2019 1:39 pm    Post subject: May not be a tool,,but worked good Reply to specific post Reply with quote

Today was a bit wet,,a good day to wash the back of the rental cottage in PA

Its been on my mind for a while,,the back of the house gets some green mold on it once every couple of years

Above the bilco door,and some near the bottom
this bleach I had bought years ago in home depot.
Its seems thicker than regular bleach,,and really worked good.

I mixed it around 1/3 bleach /2/3 water,brushed it on,,then rinsed everything off


On a dry day I Will have to paint the bilco door,it needs it


It was a good project to do today,and everything went pretty well

I always like to spend some time around ,,remembering lifting each stone,,lol





,,some of them were heavy!! lol
 
Back to top
View user's profile
showcrop
Tractor Guru


Joined: 13 Dec 2000
Posts: 23614
Location: Chester NH

Report to Moderator

PostPosted: Mon Jul 08, 2019 2:22 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote


Do you go around with a wooden mallet checking the stones to be sure that they are still solid?
 
Back to top
View user's profile
guido
Tractor Guru


Joined: 09 Aug 2007
Posts: 7926


Report to Moderator

PostPosted: Mon Jul 08, 2019 3:13 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

Hello karry@ stinescorner,

Recipe coming. You have been busy!

In one word EXCELLENTLY DONE,

Guido.
 
Back to top
View user's profile
Mike M
Tractor Guru


Joined: 31 Mar 1998
Posts: 27859


Report to Moderator

PostPosted: Mon Jul 08, 2019 4:38 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

Go to home depot and get some wet and forget or spray and forget. Spray it on the mildew and walk away. It will work good.
 
Back to top
View user's profile
Russ from MN
Tractor Guru


Joined: 11 Feb 2006
Posts: 9357
Location: N MN

Report to Moderator

PostPosted: Mon Jul 08, 2019 4:52 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

Good job! That's a nice place!
 
Back to top
View user's profile
Destroked 450
Tractor Guru


Joined: 31 Mar 2016
Posts: 4339
Location: Harned, Ky.

Report to Moderator

PostPosted: Tue Jul 09, 2019 5:08 am    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote


That must be the north side of the house.
Ours get that way on the north end, house faces to the west.
Nice job, cleaned ours two weeks ago.
 
Back to top
View user's profile
SVcummins
Tractor Guru


Joined: 06 Feb 2017
Posts: 10153


Report to Moderator

PostPosted: Tue Jul 09, 2019 8:31 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

Wouldn?t mind living in that cottage
 
Back to top
View user's profile
Traditional Farmer
Tractor Guru


Joined: 26 Apr 2007
Posts: 16878


Report to Moderator

PostPosted: Thu Jul 11, 2019 12:26 am    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

Figures as Moss always grows on the North side of a tree.
 
Back to top
View user's profile
rlp in Co.
Long Time User


Joined: 17 May 2010
Posts: 1399


Report to Moderator

PostPosted: Thu Jul 11, 2019 12:48 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

That stonework looks great!
 
Back to top
View user's profile
egbinor
Regular


Joined: 24 Apr 2009
Posts: 166


Report to Moderator

PostPosted: Mon Jul 15, 2019 2:26 pm    Post subject: Re: May not be a tool,,but worked good Reply to specific post Reply with quote

Never heard of a Bilco door before
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Tool Talk All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters