Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Injection pump oil change - ford 7000


 
Post new topic    
View previous topic :: View next topic  
Author Message
jwh f-100
New User


Joined: 30 Apr 2018
Posts: 10


Report to Moderator

PostPosted: Wed Sep 11, 2019 1:43 am    Post subject: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

Hey all. I have a ford 7000.. Is there a how to on changing the oil in the injection pump??? Pretty straight forward?? Thanks
 
Back to top
View user's profile
Dieseltech
Tractor Guru


Joined: 29 Feb 2012
Posts: 7593
Location: Indiana

Report to Moderator

PostPosted: Wed Sep 11, 2019 3:27 am    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

Pump has oil drain plug at the bottom, and same size oil level plug on the side. Be careful and DON'T strip the threads. Large oil fill plug is at top front, use same oil as in engine..
 
Back to top
View user's profile
jwh f-100
New User


Joined: 30 Apr 2018
Posts: 10


Report to Moderator

PostPosted: Wed Sep 11, 2019 4:01 am    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

Ok thanks. So just fill until oil runs out oil level plug. Got it thanks
 
Back to top
View user's profile
Bern
Tractor Guru


Joined: 05 Apr 1999
Posts: 6429


Report to Moderator

PostPosted: Wed Sep 11, 2019 4:17 am    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

Any time I'm inside one of those pumps I always Helicoil those drain and level holes.

On a different note, were you the one who put different plungers and barrels in your 6000 pump? Mine is an awful hard starting beast. It runs great once it's going. I would love some more details on that if you wouldn't mind.

Thanks
 
Back to top
View user's profile
sotxbill
Tractor Guru


Joined: 14 Jun 2003
Posts: 6199


Report to Moderator

PostPosted: Wed Sep 11, 2019 5:42 am    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote


AS others have said... DONT strip the bolts when you put them back in....The pump is made out of pot metal, or something easy to strip..... Otherwise an easy job. Most pumps end up diluting the oil with diesel fuel over time,.., but that does not seem to bother them.


I always paint my service points yellow, like the new cars do... So the dip sticks, oil plugs, and check plugs all get painted yellow. Oil caps, radiator caps are all yellow. Helps find them in the green fields on occasion as well. I also do all the grease fittings so I can find them quicker. Haybines can have a lot of hidden fittings... around 29 fittings.... And the three plugs on the pump get painted yellow.
 
Back to top
View user's profile
Dieseltech
Tractor Guru


Joined: 29 Feb 2012
Posts: 7593
Location: Indiana

Report to Moderator

PostPosted: Wed Sep 11, 2019 6:21 am    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

I use Heli coils in those too, always thought it was silly as they came. Fun part is getting the housing welded back up when someone puts in a larger/longer bolt in. Have had several housings with HUGE holes in the side or bottom when the weight cage catches that bolt!
Far as starting cold goes, mine I mow with does not start well cold unless the cold start button is used. I made a button pushing hinge bracket/cable setup so I can trip it from the seat. I put in 9.0 MM plungers that have the cold start notch in the plunger top edge that retards the timing. Plungers were used I had from a Perkins V-8 parts pump. Next one I do I'll use the smaller 8.0 MM retard notch plungers like used in 5000, 8000, and 9000 pumps as mine does not start well hot unless the button is used then too. The 6000 used 7.5 MM flat top, no retard notch plungers that don't start well cold like the later pumps do. I wonder if a timing change back to 22 or 23 degrees instead of 26 would help? Might be worth a try as it's not hard to shift it a bit.
 
Back to top
View user's profile
jwh f-100
New User


Joined: 30 Apr 2018
Posts: 10


Report to Moderator

PostPosted: Wed Sep 11, 2019 11:41 am    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

Thanks for all the replies!! You all have me nervous about the plugs.. Embarassed
 
Back to top
View user's profile
Fordfarmer
Tractor Guru


Joined: 12 Dec 2005
Posts: 9876
Location: Ladysmith, WI

Report to Moderator

PostPosted: Wed Sep 11, 2019 12:31 pm    Post subject: Re: Injection pump oil change - ford 7000 Reply to specific post Reply with quote

Don't be nervous... just don't cross
thread them, or overtighten.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters