VAO FENDERS

JoefromAlabama · Regular Joined: 19 Nov 2012 Posts: 32 Report to Moderator

I am restoring a CASE VAO tractor. I have the rear round fenders but i do not have the shields that attach to the fenders and go forward. Does anyone know of anyone who is reproducing them? Thanks for the help.

Hoofer B · Posted: Mon Jan 27, 2020 3:46 pm Post subject: Re: VAO FENDERS

Let me know when you find some, as I will take a set too. Bill

Don Rudolph · Posted: Mon Jan 27, 2020 5:03 pm Post subject: Re: VAO FENDERS

Bill,

I have one for a pattern if you can find someone to do the fabricating. Don

JoefromAlabama · Regular Joined: 19 Nov 2012 Posts: 32 Report to Moderator

Don, if I can not find someone reproducing them I may try to work out something to use yours as a pattern. Do you have both sides or just one.

Don Rudolph · Posted: Mon Jan 27, 2020 8:00 pm Post subject: Re: VAO FENDERS

I only have 1 side, but I think they are interchangeable. Email is open. Don

VACLee · Posted: Tue Jan 28, 2020 5:34 am Post subject: Re: VAO FENDERS

I believe he is referring to the shields that attach to the fenders and run up beside the engine. They would not be interchangeable. Lee

Don Rudolph · Posted: Tue Jan 28, 2020 6:31 am Post subject: Re: VAO FENDERS

VAC Lee is correct. I misread your post. I have the fender outside cap, not the shield. Sorry for the mistake. Don

Hoofer B · Posted: Tue Jan 28, 2020 4:30 pm Post subject: Re: VAO FENDERS

Don, I will be calling you soon about another matter. Bill

Allis Chalmers	Case	Farmall IH	Ford 9N,2N,8N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver