Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

560 IH Carburetor fuel line seal


 
Post new topic    
View previous topic :: View next topic  
Author Message
KFFarm
Regular


Joined: 01 Jan 2016
Posts: 120


Report to Moderator

PostPosted: Fri Jul 31, 2020 6:05 pm    Post subject: 560 IH Carburetor fuel line seal Reply to specific post Reply with quote

What is a good remedy when the flat ish sealing ring on the fuel supply line is not longer useable? Its the one that threads into the fuel screen fitting in the carburetor.

TIA!!!
 
Back to top
View user's profile
rustred
Tractor Guru


Joined: 01 Jul 2009
Posts: 32594


Report to Moderator

PostPosted: Fri Jul 31, 2020 6:56 pm    Post subject: Re: 560 IH Carburetor fuel line seal Reply to specific post Reply with quote

you will need to go to napa or a dealer and see if they can match up that fiber washer. if you had some thin packing you could wrap it around
and might work temporarily. it will look like string with graphite on it. a handy man could make one out of some brass shim stock. where
there's a will theres a way.
 
Back to top
View user's profile
KFFarm
Regular


Joined: 01 Jan 2016
Posts: 120


Report to Moderator

PostPosted: Fri Jul 31, 2020 7:09 pm    Post subject: Re: 560 IH Carburetor fuel line seal Reply to specific post Reply with quote


Poor description on my part. Its the seal on the steel fuel line where it enters the screen fitting.
 
Back to top
View user's profile
wore out
Long Time User


Joined: 01 Oct 2019
Posts: 789


Report to Moderator

PostPosted: Fri Jul 31, 2020 7:43 pm    Post subject: Re: 560 IH Carburetor fuel line seal Reply to specific post Reply with quote

IH used a special brass "nut" with a ferrule attached that separated the first time it was tightened.

It's unlikely you will find the correct part locally except at the dealership (IF they still stock them).



This is the special fuel line nut with attached compression sleeve IH typically used, current part # 222-503.
If this is what your tractor originally had, the sediment bowl and the carb inlet fitting are made to accept this special nut.

LOTS of sources, from the FIAT dealer to IH restoration parts sources on the 'net, GOOGLE 222-503. They are not real expensive, not a big deal to get the correct part and do the job right
 
Back to top
View user's profile
KFFarm
Regular


Joined: 01 Jan 2016
Posts: 120


Report to Moderator

PostPosted: Sat Aug 01, 2020 5:11 am    Post subject: Re: 560 IH Carburetor fuel line seal Reply to specific post Reply with quote


Thank you. I just found out that Steiner carries them.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters