Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Who is rebuilding or producing 4 cyl row crop power steering


 
Post new topic    
View previous topic :: View next topic  
Author Message
showcrop
Tractor Guru


Joined: 13 Dec 2000
Posts: 30020
Location: Chester NH

Report to Moderator

PostPosted: Tue Dec 31, 2019 4:17 am    Post subject: Who is rebuilding or producing 4 cyl row crop power steering Reply to specific post Reply with quote

A infrequent poster posted on starting up a service. Anyone know who it was?
 
Back to top
View user's profile
MarkB_MI
Tractor Guru


Joined: 29 Aug 2004
Posts: 15141


Report to Moderator

PostPosted: Tue Dec 31, 2019 4:59 am    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

At one time, Long Lane Tractor offered row crop cylinder rebuilds. Here's their website, which describes their current business as limited to parts.

https://www.lltractor.com

You can give them a call at 717-367-8610 and see what they say.
 
Back to top
View user's profile
Kirk-NJ
Tractor Guru


Joined: 10 Dec 2006
Posts: 5854


Report to Moderator

PostPosted: Wed Jan 01, 2020 4:05 am    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

Should you decide to rebuild yourself. My friend is rebuilding his. He is having problem getting parts that are NLA. Should you go that route i can get info from him if needed. His
is a 960 with the later style 2 piece pedestal
 
Back to top
View user's profile
showcrop
Tractor Guru


Joined: 13 Dec 2000
Posts: 30020
Location: Chester NH

Report to Moderator

PostPosted: Wed Jan 01, 2020 4:50 am    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

CVPost-Kirk-NJ wrote:
(quoted from post at 05:05:49 01/01/20) Should you decide to rebuild yourself. My friend is rebuilding his. He is having problem getting parts that are NLA. Should you go that route i can get info from him if needed. His
is a 960 with the later style 2 piece pedestal


Thanks Kirk, I had the rod on a 960 replaced maybe 15 years ago. The cutting and welding was fairly expensive. On another one I took the valve apart and took care of some problems, but I din't have a tube problem like grandpa Love did. There is a fellow who posts infrequently who was getting set up to rebuild them six months ago and posted again about six weeks ago.
 
Back to top
View user's profile
WayneIA
Tractor Expert


Joined: 12 Jul 2009
Posts: 2280


Report to Moderator

PostPosted: Wed Jan 01, 2020 5:10 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

Messick,s seem to have both seal kits in stock but hang on to your hat!!!
 
Back to top
View user's profile
ooticamitica
Regular


Joined: 19 Feb 2010
Posts: 303


Report to Moderator

PostPosted: Wed Jan 01, 2020 8:41 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote


just saw that, very frustrating considering i want to get my row crop cylinder rebuilt.
 
Back to top
View user's profile
pomester
Long Time User


Joined: 04 Mar 2016
Posts: 813


Report to Moderator

PostPosted: Wed Jan 01, 2020 8:51 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

check out this thread - https://forums.yesterdaystractors.com/viewtopic.php?t=1388974

I had a cylinder rebuilt - I appears to be done very well, but I have not installed it yet - be aware that you lose the stock appearance, if that is important - you also gain the capability to disassemble/rebuild








if you search eBay for 'Ford Row Crop Tractor 901 power steering cylinder rebuilt' you'll find a remanufactured unit - I don't know anything about these other than what's in the listing

David
 
Back to top
View user's profile
bob57
Regular


Joined: 12 May 2012
Posts: 160
Location: Enid,Okla.

Report to Moderator

PostPosted: Fri Jan 17, 2020 1:11 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

Yep, that was me.I rebuilt that unit and that's my painter's tape on the end of the rod.I have all the parts to rebuild the cylinders as well as new control valves, ball studs,ball stud seats, inner sleeves, tie rod ends,etc.Feel free to send me an email with any questions.Bob
 
Back to top
View user's profile
bob57
Regular


Joined: 12 May 2012
Posts: 160
Location: Enid,Okla.

Report to Moderator

PostPosted: Fri Jan 17, 2020 1:17 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

The cylinder you see was rebuilt by me last summer.I have new rods, inner cylinders, pistons, rings and rod seals,control valves. ball studs,ball stud seats,etc.
Bob
 
Back to top
View user's profile
bob57
Regular


Joined: 12 May 2012
Posts: 160
Location: Enid,Okla.

Report to Moderator

PostPosted: Fri Jan 17, 2020 1:21 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

I started rebuilding these cylinders last year and have all the parts in stock.Let me know if I can help.
Bob
 
Back to top
View user's profile
ooticamitica
Regular


Joined: 19 Feb 2010
Posts: 303


Report to Moderator

PostPosted: Fri Jan 17, 2020 3:51 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop power stee Reply to specific post Reply with quote

CVPost-bob57 wrote:
(quoted from post at 18:21:48 01/17/20) I started rebuilding these cylinders last year and have all the parts in stock.Let me know if I can help.
Bob


I'll be needing your services in the near future. I just fixed my row crop steering box and have some other work to do before I get to my cylinder.
 
Back to top
View user's profile
mschoff
New User


Joined: 13 Jan 2021
Posts: 1


Report to Moderator

PostPosted: Wed Jan 13, 2021 4:51 pm    Post subject: Re: Who is rebuilding or producing 4 cyl row crop Reply to specific post Reply with quote

CVPost-bob57 wrote:
(quoted from post at 14:17:59 01/17/20) The cylinder you see was rebuilt by me last summer.I have new rods, inner cylinders, pistons, rings and rod seals,control valves. ball studs,ball stud seats,etc.
Bob
hi bob are you still rebuiling 901 cylinders
 
Back to top
View user's profile
showcrop
Tractor Guru


Joined: 13 Dec 2000
Posts: 30020
Location: Chester NH

Report to Moderator

PostPosted: Thu Jan 14, 2021 5:59 am    Post subject: Re: Who is rebuilding or producing 4 cyl row crop Reply to specific post Reply with quote

mschoff wrote:
(quoted from post at 17:51:11 01/13/21)
CVPost-bob57 wrote:
(quoted from post at 14:17:59 01/17/20) The cylinder you see was rebuilt by me last summer.I have new rods, inner cylinders, pistons, rings and rod seals,control valves. ball studs,ball stud seats,etc.
Bob
hi bob are you still rebuiling 901 cylinders


mschoff, Welcome to YT. You may want to go to the top of the Ford forum and hit the "new topic" button and start a new shout out to Bob. Many guys here are on classic view where the old threads don't bump up so they won't see a post added to an old thread.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters