Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Iveco Diesel


 
Post new topic    
View previous topic :: View next topic  
Author Message
jaoneill
Regular


Joined: 22 Apr 2010
Posts: 431


Report to Moderator

PostPosted: Wed Jan 13, 2021 10:57 am    Post subject: Iveco Diesel Reply to specific post Reply with quote

Neighbor has a sawmill powered by an older Iveco diesel. It was acting up so he pulled the injection pump and sent it off for a rebuild. When he went to reinstall the pump he realized that there is no keyway slot to line it up for timing purposes. He doesn't have internet access and I have been trying to help him find a shop manual or a process to set the timing on the pump. Anything I have been able to find is for newer Ivecos and/or doesn't have the pump timing included. My best guess is that there has to be some sort of a special tool needed but even then there has to be a set point around TDC to set it to. Any suggestions? It is an Iveco Model 450NE, Type 7450 U 00A800 with a Lucas Delpha pump.

Thanks in advance for any help that can be offered, the old guy is about beside himself.

Jim
 
Back to top
View user's profile
Bob Bancroft
Tractor Guru


Joined: 05 Mar 2009
Posts: 9496
Location: Aurora NY

Report to Moderator

PostPosted: Wed Jan 13, 2021 5:13 pm    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

Seems that wherever he sent the pump should be able to give him some guidance.
 
Back to top
View user's profile
jaoneill
Regular


Joined: 22 Apr 2010
Posts: 431


Report to Moderator

PostPosted: Wed Jan 13, 2021 5:41 pm    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

CVPost-Bob Bancroft wrote:
(quoted from post at 22:13:22 01/13/21) Seems that wherever he sent the pump should be able to give him some guidance.

One would think but they haven't been particularly helpful. They see their role as having been fulfilled in returning the pump set for #1.
 
Back to top
View user's profile
SVcummins
Tractor Guru


Joined: 06 Feb 2017
Posts: 21249


Report to Moderator

PostPosted: Thu Jan 14, 2021 1:23 am    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

Set the engine for top dead center number compression
stroke both valves closed and install the pump would be what
I’d do
 
Back to top
View user's profile
jaoneill
Regular


Joined: 22 Apr 2010
Posts: 431


Report to Moderator

PostPosted: Thu Jan 14, 2021 7:13 am    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

CVPost-svcummins wrote:
(quoted from post at 06:23:23 01/14/21) Set the engine for top dead center number compression
stroke both valves closed and install the pump would be what
I d do

It may come to that but it would be a crapshoot. Most pumps are timed a bit BTDC, so one would have to guess what the advance would be on this one. Only a few degrees off and it could be beyond the range of the timing adjustment slots. The odds of a positive result would be improved immensely if one had the specs.
 
Back to top
View user's profile
wore out
Tractor Expert


Joined: 01 Oct 2019
Posts: 2151


Report to Moderator

PostPosted: Thu Jan 14, 2021 11:34 am    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

jaoneill wrote:
(quoted from post at 11:57:02 01/13/21) Neighbor has a sawmill powered by an older Iveco diesel. It was acting up so he pulled the injection pump and sent it off for a rebuild. When he went to reinstall the pump he realized that there is no keyway slot to line it up for timing purposes. He doesn't have internet access and I have been trying to help him find a shop manual or a process to set the timing on the pump. Anything I have been able to find is for newer Ivecos and/or doesn't have the pump timing included. My best guess is that there has to be some sort of a special tool needed but even then there has to be a set point around TDC to set it to. Any suggestions? It is an Iveco Model 450NE, Type 7450 U 00A800 with a Lucas Delpha pump.

Thanks in advance for any help that can be offered, the old guy is about beside himself.

Jim


I just talked to "Eric" at "Mid Atlantic Engine Supply" in Cinnaminson, New Jersey, a very nice gentleman to talk to, and he may be able to help, seems very knowledgeable..

There MAY be an engine serial number, as well that would help him help you.

Phone number there is 1-800-257-8133. (He answered with a different business name, but said it's all the same Co., so be prepared for that.)
 
Back to top
View user's profile
wore out
Tractor Expert


Joined: 01 Oct 2019
Posts: 2151


Report to Moderator

PostPosted: Thu Jan 14, 2021 11:35 am    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote


Forgot to link their website: https://www.maesco.com/products/iveco/iveco.html
 
Back to top
View user's profile
jaoneill
Regular


Joined: 22 Apr 2010
Posts: 431


Report to Moderator

PostPosted: Thu Jan 14, 2021 2:23 pm    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

wore out wrote:
(quoted from post at 16:35:53 01/14/21)
Forgot to link their website: https://www.maesco.com/products/iveco/iveco.html


Thank you!!
 
Back to top
View user's profile
Butch(OH)
Tractor Guru


Joined: 19 Jun 2000
Posts: 3875


Report to Moderator

PostPosted: Fri Jan 15, 2021 3:22 am    Post subject: Re: Iveco Diesel Reply to specific post Reply with quote

Lacking any other information for that
particular engine the pump for my Case
W11B with 4B Cummins is like that. That
particular pump is returned to the
installer locked at #1. The timing gear
case has a push pin that goes in to a
recess when the gear is signed up. InstLl
pump, torque the nut, done. Your engine
may have a push pin or may have to line
up a timing mark. Certain New holland
tractors use that brand engine, one of
thier techs might be of assistance?
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Stationary Engines All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters