Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Broken crank pulley


 
Post new topic    
View previous topic :: View next topic  
Author Message
jkmdg84
Regular


Joined: 04 Apr 2013
Posts: 116


Report to Moderator

PostPosted: Wed Apr 07, 2021 4:28 pm    Post subject: Broken crank pulley Reply to specific post Reply with quote

Dumb me dropped my crank pulley for my B. Is the chunk that broke off going to be an issue if I put it back on? Or should I just buy a new one?


 
Back to top
View user's profile
the tractor vet
Tractor Guru


Joined: 24 May 2000
Posts: 15928


Report to Moderator

PostPosted: Wed Apr 07, 2021 4:36 pm    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

Round the ruff edges off smooth throw so paint on it and i do not think you will have any issues being up that high .
 
Back to top
View user's profile
rustred
Tractor Guru


Joined: 01 Jul 2009
Posts: 34483


Report to Moderator

PostPosted: Wed Apr 07, 2021 4:54 pm    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

x2 on that.
 
Back to top
View user's profile
dewy
Long Time User


Joined: 01 Oct 2013
Posts: 1018


Report to Moderator

PostPosted: Wed Apr 07, 2021 5:21 pm    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

the new ones are alittle to tight has been my luck...that one looks good to me..........dewy
 
Back to top
View user's profile
wore out
Tractor Expert


Joined: 01 Oct 2019
Posts: 2151


Report to Moderator

PostPosted: Wed Apr 07, 2021 6:24 pm    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

CVPost-jkmdg84 wrote:
(quoted from post at 17:28:27 04/07/21) Dumb me dropped my crank pulley for my B. Is the chunk that broke off going to be an issue if I put it back on? Or should I just buy a new one?

<img src=/cvphotos/cvphoto84237.jpg>


Gosh, your post sure brought the "hack job" guys out of the woodwork!

Yes, what's been said will work just fine, on the other hand, for your nice looking restoration it would be no big deal to silver solder or braze the broken of pieces back in place, with a little grinding or belt sanding an paint no one would ever know.
 
Back to top
View user's profile
rustred
Tractor Guru


Joined: 01 Jul 2009
Posts: 34483


Report to Moderator

PostPosted: Wed Apr 07, 2021 8:47 pm    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

Where are they?
 
Back to top
View user's profile
BarnyardEngineering
Tractor Guru


Joined: 23 Mar 2016
Posts: 6983


Report to Moderator

PostPosted: Thu Apr 08, 2021 3:12 am    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

wore out wrote:
(quoted from post at 19:24:18 04/07/21)
CVPost-jkmdg84 wrote:
(quoted from post at 17:28:27 04/07/21) Dumb me dropped my crank pulley for my B. Is the chunk that broke off going to be an issue if I put it back on? Or should I just buy a new one?

<img src=/cvphotos/cvphoto84237.jpg>


Gosh, your post sure brought the "hack job" guys out of the woodwork!

Yes, what's been said will work just fine, on the other hand, for your nice looking restoration it would be no big deal to silver solder or braze the broken of pieces back in place, with a little grinding or belt sanding an paint no one would ever know.


There's such a small piece missing, that it would make more sense to simply build the edge up with brazing and file it to shape.
 
Back to top
View user's profile
DMartin9N-2N
Long Time User


Joined: 23 Jul 2007
Posts: 731


Report to Moderator

PostPosted: Sat Apr 10, 2021 7:55 am    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

Good morning Engineer and others: Why would the pulley not work just as it is with the little piece missing? I will admit, it would not look well at a show, but as far as running, it seems to me it would be ok.

Dennis M. in W. Tenn.
 
Back to top
View user's profile
560Dennis
Long Time User


Joined: 10 Dec 2015
Posts: 502


Report to Moderator

PostPosted: Sat Apr 10, 2021 7:58 am    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

Boy that just make you sick when that happens .
Sand blast it clean it , chamfer break , preheat pulley ,braze it and machine the groove smooth ,it will look great , load it up and take it to the show. Tell every you fixed yourself, they will never see it
Good luck
 
Back to top
View user's profile
BarnyardEngineering
Tractor Guru


Joined: 23 Mar 2016
Posts: 6983


Report to Moderator

PostPosted: Sat Apr 10, 2021 1:01 pm    Post subject: Re: Broken crank pulley Reply to specific post Reply with quote

The water pump pulley on my Super H is missing a much larger chunk and it's not eating the belt. I just pretended I didn't see it and painted over it. The tractor doesn't see enough use to really make it worthwhile to open that can of worms. Maybe when I get my new shop built.

I'm just thinking here you've got it apart and accessible, why not make it pretty? Otherwise it will be a can of worms to pull it apart and fix it later after you get tired of having nightmares about it, LOL.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters