Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Busted lift cylinder TO35

Goto page Previous  1, 2

 
Post new topic    
View previous topic :: View next topic  
Author Message
John Deere D
Tractor Guru


Joined: 14 Jun 2011
Posts: 5008


Report to Moderator

PostPosted: Wed Feb 10, 2021 9:26 pm    Post subject: Re: Busted lift cylinder TO35 Reply to specific post Reply with quote

Call this number..... 1-877-319-0059

Call this number... 1-800-481-1353 or (613) 475-1771 and by fax (613) 475-3748

Tell them who you are, your location, and the part you require..

Bob..
 
Back to top
View user's profile
scoobieguy
Regular


Joined: 17 Aug 2018
Posts: 97


Report to Moderator

PostPosted: Sun Feb 21, 2021 4:50 pm    Post subject: Re: Busted lift cylinder TO35 Reply to specific post Reply with quote

There is a 180967M1 on ebay from reliable after market parts, its expensive.

And this one in Texas 180967M1 Massey Ferguson 35 Draft Control Cylinder call New Available
Located at: Broke F Farm Supply in Commerce, TX (903-886-8779) bffstx@gmail.com
Category: Hitch/Drawbar Stock #: 32937
 
Back to top
View user's profile
shaeff
Regular


Joined: 03 Nov 2015
Posts: 309


Report to Moderator

PostPosted: Mon Feb 22, 2021 6:15 am    Post subject: Re: Busted lift cylinder TO35 Reply to specific post Reply with quote

Steiner:


 
Back to top
View user's profile
mooseracing
Regular


Joined: 01 Nov 2009
Posts: 52
Location: The mitten state

Report to Moderator

PostPosted: Tue Feb 23, 2021 11:45 am    Post subject: Re: Busted lift cylinder TO35 Reply to specific post Reply with quote


The steiner one is not for a 35, it has different mounts.

I put in a new pump in my '55 last year, kept the old lower pressure relief but went to a 3" piston and cylinder due to the parts issues.
 
Back to top
View user's profile
ekerrigan
New User


Joined: 04 May 2021
Posts: 1


Report to Moderator

PostPosted: Tue May 04, 2021 1:29 am    Post subject: Re: Busted lift cylinder TO35 Reply to specific post Reply with quote

mooseracing wrote:
(quoted from post at 12:45:35 02/23/21)
The steiner one is not for a 35, it has different mounts.

I put in a new pump in my '55 last year, kept the old lower pressure relief but went to a 3" piston and cylinder due to the parts issues.




So Im guessing the 3 bolted right on the cover with new studs? Was there anything else that you need to do to make it work in place of the 2 1/2 cylinder?
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Harry Ferguson All times are GMT - 8 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters