Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

John Deere 95 rebuild


 
Post new topic    
View previous topic :: View next topic  
Author Message
tomstractorsandtoys
Tractor Guru


Joined: 30 Nov 2010
Posts: 4723


Report to Moderator

PostPosted: Fri May 07, 2021 4:54 am    Post subject: John Deere 95 rebuild Reply to specific post Reply with quote

I have decided to do a rebuild this summer of my late model 95. It is a corn special and we have been having problems with the variable speed cylinder drive slipping when harvesting corn. The 105 has the same problem and many others have told me this is the weak spot on these machines. I found some parts machines in MN that do not have the variable speed but have a chain drive cylinder. We almost never change speed for corn or soybeans (usually run 450 rpm's) so this is the route we are going to go. Would like to find an assortment of sprockets so we could have the option of changing speeds. The only other option might be to find different sprockets (which I haven't found yet) for the variable speed cylinder. With factory sprockets you can go from 400 rpm's to a little over 1000 rpm's. There were different sprockets to make the top speed around 700 rpm's. I am still in the thinking stage and plan to start gathering parts soon. Will post pics as we get into it. Tom

 
Back to top
View user's profile
mtf
Long Time User


Joined: 25 Aug 2013
Posts: 633


Report to Moderator

PostPosted: Fri May 07, 2021 6:14 am    Post subject: Re: John Deere 95 rebuild Reply to specific post Reply with quote

I have one sprocket from a 55, I think it is the smaller one. It has been hanging on the barn wall since the machine left. Probably 20 years ago. Nathan
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Combines and Harvesters All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters