Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

John Deere 2755 Hydraulic Multiplier


 
Post new topic    
View previous topic :: View next topic  
Author Message
cjarrington2811
New User


Joined: 18 May 2021
Posts: 5


Report to Moderator

PostPosted: Tue May 18, 2021 5:42 pm    Post subject: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

I have a 1992 2755 with 2 hydraulic valves. I am wanting to hook a round baler up to it, in which I need 4 valves. I have a multiplier, but the 2 valves on the tractor use a small lever above the valves to allow you to hook into them... and it only lets you do one side at a time. When I go to hook my multiplier in, I need to do both sides at the same time. Has anyone had this problem or came across any solutions to it? Thanks for your help.
 
Back to top
View user's profile
centash
Tractor Guru


Joined: 01 Nov 2014
Posts: 7139
Location: southern ontario canada

Report to Moderator

PostPosted: Tue May 18, 2021 5:59 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

Shut the tractor off and move the control lever back and forth several times and
then leave it in the float position. This will relieve the pressure in the system
and ease the hook up.

Ben
 
Back to top
View user's profile
cjarrington2811
New User


Joined: 18 May 2021
Posts: 5


Report to Moderator

PostPosted: Tue May 18, 2021 6:02 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

I see what your saying but the problem is something different. Im just trying to go from 2 to 4 hydraulic outlets using a multiplier. The outlets have a small lever above them that lets you only plug them in one at at time but my multiplier needs to plug both in at same time.
 
Back to top
View user's profile
cjarrington2811
New User


Joined: 18 May 2021
Posts: 5


Report to Moderator

PostPosted: Tue May 18, 2021 6:05 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

[quote="cjarrington2811"](reply to post at 19:02:46 05/18/21
 
Back to top
View user's profile
centash
Tractor Guru


Joined: 01 Nov 2014
Posts: 7139
Location: southern ontario canada

Report to Moderator

PostPosted: Tue May 18, 2021 6:46 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

Can you hold both levers over at the same time while inserting the multiplier? You
need 3 hands....

Ben
 
Back to top
View user's profile
cjarrington2811
New User


Joined: 18 May 2021
Posts: 5


Report to Moderator

PostPosted: Tue May 18, 2021 6:48 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

CVPost-centash wrote:
(quoted from post at 19:46:31 05/18/21) Can you hold both levers over at the same time while inserting the multiplier? You
need 3 hands....

Ben

Lol I wish, 1 lever controls both outlets, push to left for left outlet to open up, push to right for right outlet to open up. Only 1 outlet is open at a time but need both open together
 
Back to top
View user's profile
buickanddeere
Tractor Guru


Joined: 31 May 2003
Posts: 36642


Report to Moderator

PostPosted: Tue May 18, 2021 6:57 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

everybody backup a step here .
The loader has no business being connected through the SVC connections where it operates slowly because the front pump is cavitating . Not enough supply oil .
The loader is supposed to be supplied from a T in the high pressure line after the priority valve . Loader oil is to be returned to the tractor via a ported transmission filter cover .
This will leave the SCV available for loads .
 
Back to top
View user's profile
centash
Tractor Guru


Joined: 01 Nov 2014
Posts: 7139
Location: southern ontario canada

Report to Moderator

PostPosted: Tue May 18, 2021 7:00 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

Ok, I get it now, same as my 2955. You may have to remove both couplers with the
lever and put in a standard coupler without the quick release lever. Unless there
is a way to remove just the lever but still keep the detents...

Ben
 
Back to top
View user's profile
cjarrington2811
New User


Joined: 18 May 2021
Posts: 5


Report to Moderator

PostPosted: Tue May 18, 2021 7:06 pm    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

Thanks for your input Ben, will look into that.
 
Back to top
View user's profile
Tx Jim
Tractor Guru


Joined: 14 Feb 1999
Posts: 30186


Report to Moderator

PostPosted: Wed May 19, 2021 4:28 am    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

buickanddeere wrote:
(quoted from post at 21:57:45 05/18/21) everybody backup a step here .
The loader has no business being connected through the SVC connections where it operates slowly because the front pump is cavitating . Not enough supply oil .
The loader is supposed to be supplied from a T in the high pressure line after the priority valve . Loader oil is to be returned to the tractor via a ported transmission filter cover .
This will leave the SCV available for loads .


If your tractor has a frt end loader I wholeheartedly agree with buickanddeere.
 
Back to top
View user's profile
buickanddeere
Tractor Guru


Joined: 31 May 2003
Posts: 36642


Report to Moderator

PostPosted: Wed May 19, 2021 9:39 am    Post subject: Re: John Deere 2755 Hydraulic Multiplier Reply to specific post Reply with quote

Does the 2755 have the option oil return line from the SCV to a ported filter cover ?
Why not just obtain another hydraulic valve and bolt it to the original like the factory did with dual SCV optioned tractors .

https://partscatalog.deere.com/jdrc/navigation/equipment/74533/level/2/snp/MTg0MzQxOkNIQVBURVJbMTA2MTojQlVTSU5FU1NfUkVHSU9OLDQwNTA6I0NBVEFMT0csNzQ1MzM6RVFVSVBNRU5UXQ
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> John Deere All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters