mower

JohnE/Pa · Posted: Sat May 11, 2013 12:08 pm Post subject: mower

I sure could use a little help,I need to replace a belt on my woods mower it is a RM 59 Woods 3PTH mower,could any one show me a belt diagram how to install this belt,would any help on this.

charlie n · Posted: Sat May 11, 2013 12:55 pm Post subject: Re: mower

There should be a diagram on the under side of the shield.If not goggle your mower.One should show up.Good Luck..

John E/Pa · Regular Joined: 30 Sep 2010 Posts: 61 Report to Moderator

Looked under the panel,nothing there,tried to Google no luck there,sure hope some one can give me a diagram.

Dave8N in Pa · Posted: Sat May 11, 2013 2:29 pm Post subject: Re: mower

John, I have the same mower It's up at the farm. Maybe Tuesday till I get up there.

carlntexas · Posted: Sat May 11, 2013 2:38 pm Post subject: Re: mower

http://bit.ly/15ZTRcy

Royse · Posted: Sat May 11, 2013 3:28 pm Post subject: Re: mower

There are several variations of the RM-59.
This is the belt routing for the RM-59-3.
Hopefully this is the one you have.

JohnE/Pa · Posted: Sat May 11, 2013 3:29 pm Post subject: Re: mower

Thanks carintexas I got the picture , looks very similiar to what I have now if I can just enlarge the picture it mmay get me going.appreciate the help

JohnE/Pa · Posted: Sat May 11, 2013 3:31 pm Post subject: Re: mower

thanks Dave,any help at all will be appreciated

JohnE/Pa · Posted: Sat May 11, 2013 3:33 pm Post subject: Re: mower

My e-mail is open

oldtanker · Posted: Sat May 11, 2013 7:14 pm Post subject: Re: mower

John. You can download the manual for your Woods mower directly from Woods for free.

Rick

Royse · Posted: Sat May 11, 2013 7:31 pm Post subject: Re: mower

Kirk-NJ · Posted: Sun May 12, 2013 3:17 am Post subject: Re: mower

I don't know if any of you Pa boys are close the NJ and need parts but I've got a woods RM on my trailer headed to the scrap yard. Has spindles/blades. I believe it's a six footer. Don't know if parts a interchangable. Your more than welcome to strip off some parts for free or take the whole thing (for scrap price)
No, I'm not willing to strip it and send the parts.
My email is open.

Kirk

John E/Pa · Regular Joined: 30 Sep 2010 Posts: 61 Report to Moderator

Thanks so much, it looks a lot like my mower,will check it out later today, and thanks everyone for your input,dont know what I would do with out you guys,Im quite a ways from Jersey but appreciate the offer.

Clarence Parker Mi · New User Joined: 06 May 2013 Posts: 4 Report to Moderator

I have a woods R59 finish mower that I had to replace the belt mine had a diagram under the front when the sheilds are off I have a book on the mower if you need I can email the diagram to you
Bud from mich.

rd 2N in mo · Posted: Sun May 12, 2013 8:50 am Post subject: Re: mower

Just hit crtl + keys to increase or crtl - to decrease image.

Allis Chalmers	Case	Farmall IH	Ford 9N,2N,8N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver