Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

What's going on here?


 
Post new topic    
View previous topic :: View next topic  
Author Message
Old Eb
Regular


Joined: 09 Feb 2004
Posts: 128


Report to Moderator

PostPosted: Thu Jun 13, 2013 6:49 pm    Post subject: What's going on here? Reply to specific post Reply with quote

Need to move the wheels in on this tractor (Case 1896) for 30" row crop. The axle has two holes left and the tie rod has only one. Why would that be? Wondering if the steering cylinder isn't centered in the barrel? The other side has 2 holes left on the axle and two holes left on the tie rod so no problem there. What am I missing?

 


Last edited by Old Eb on Thu Jun 13, 2013 6:50 pm; edited 1 time in total
Back to top
View user's profile
1370rod
Tractor Guru


Joined: 07 Mar 2012
Posts: 5539


Report to Moderator

PostPosted: Thu Jun 13, 2013 7:58 pm    Post subject: Re: What's going on here? Reply to specific post Reply with quote

Is it possible the arm on top of the spindle needs to be moved one notch in the splines toward the tire?
 
Back to top
View user's profile
dusty coal
Guest






Report to Moderator

PostPosted: Fri Jun 14, 2013 2:16 am    Post subject: Re: What's going on here? Reply to specific post Reply with quote

looks like your power steering ram bolt is in the 2nd bolt hole, may need to unbolt and put back on after shorting you steering rod?
 
Back to top
dwag
Long Time User


Joined: 13 Jul 2004
Posts: 1411


Report to Moderator

PostPosted: Fri Jun 14, 2013 8:23 am    Post subject: Re: What's going on here? Reply to specific post Reply with quote

Looks right to me If steers right and left equally just move both sides same distance

*excuse grammar cant get punctuation to work on computer
 
Back to top
View user's profile
Old Eb
Regular


Joined: 09 Feb 2004
Posts: 128


Report to Moderator

PostPosted: Fri Jun 14, 2013 2:24 pm    Post subject: Re: What's going on here? Reply to specific post Reply with quote

Have looked at everything...don"t think I have 2" inches of adjustment or thread on the steering rod or tie rod ends. Just thought maybe somebody else had seen something like this before.
 
Back to top
View user's profile
Adirondack case guy
Tractor Guru


Joined: 04 Mar 2010
Posts: 17474


Report to Moderator

PostPosted: Fri Jun 14, 2013 4:13 pm    Post subject: Re: What's going on here? Reply to specific post Reply with quote

I agree with Rod, the steering arm is off by one spline. The end should be closer to the tire.
Loren
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters