Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

M602 Hydraulics


 
Post new topic    
View previous topic :: View next topic  
Author Message
Jay Liedman
Regular


Joined: 23 May 2013
Posts: 47
Location: Minnesota

Report to Moderator

PostPosted: Tue Oct 23, 2018 9:06 am    Post subject: M602 Hydraulics Reply to specific post Reply with quote

This is a dumb question, but I am not seeing where the place is to drain the fluid out of the hydraulic system on the M602 I am working on. Can anyone help?
 
Back to top
View user's profile
shinnery
Tractor Expert


Joined: 18 Apr 2006
Posts: 2708
Location: Hawley, Texas

Report to Moderator

PostPosted: Tue Oct 23, 2018 9:33 pm    Post subject: Re: M602 Hydraulics Reply to specific post Reply with quote

If it is the Tel-O-Flo hydraulic system there should be a 3/4 in. pipe plug in the right rear corner of the hydraulic box. Standing behind the tractor and looking forward.
My M670 has a short nipple screwed into the box and a tee on the other end. It then had the plug in the bottom of the tee and about a 6 in. pipe in the top pf the tee. The cap on the pipe also has a dipstick for checking oil level. I added a 45 deg, street ell to get the drain further away from the tractor.
The M5 and M602 say to remove the plate with the Rate and Cycle levers and fill the box to within an inch of the top, if you change it to like the M670 you can eyeball the top of the box and check the level in the pipe with a screwdriver.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Minneapolis Moline All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters