Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Aux Hydraulics on NH L555 Skid Loader


 
Post new topic    
View previous topic :: View next topic  
Author Message
HaywireRanch
New User


Joined: 05 Mar 2019
Posts: 1


Report to Moderator

PostPosted: Tue Mar 05, 2019 6:33 am    Post subject: Aux Hydraulics on NH L555 Skid Loader Reply to specific post Reply with quote

Need to add aux hydraulics NH L555 skid loader. CNH sells 2 different control valves ($625 and $1200) and a power beyond adapter ($325). The $625 valve is part of the group number 039 (Aux Hydraulics Kit) on the parts diagrams. The $1200 control valve is part of the group number 021 (Boom Hydraulics Kit) on the parts diagrams. These can be found on mesicks.com (https://www.messicks.com/nh/716621). The power beyond adapter is required for both kits and I have that ordered. This taps in to the main control valve.

Getting down to my question: Would I be able to substitute a cheaper control valve (i.e. Cross Manufacturing directional control valve or something similar) for the more expensive valves from NH. If so, what specs should this control valve meet?

Thanks in advance!
 
Back to top
View user's profile
AJ.
Tractor Expert


Joined: 20 Oct 2007
Posts: 2027
Location: UK

Report to Moderator

PostPosted: Wed Mar 06, 2019 6:47 am    Post subject: Re: Aux Hydraulics on NH L555 Skid Loader Reply to specific post Reply with quote

You can,it is possible to add another control valve,and you have a choice,you can either use the power beyond kit or plumb it into the return from the existing equipment valve return,you would remove the return from the existing valve and from that port connect a line to the in port of the aux valve you are adding,the return line would be connected to the out of the aux valve,you then fit the pressure lines to the attachment you are adding,if the existing hose bore of the return line is say 3/4" use a valve of that size or whatever the bore is.
AJ
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters