Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

TD8E Steering Adjustment


 
Post new topic    
View previous topic :: View next topic  
Author Message
granite
New User


Joined: 28 Mar 2019
Posts: 2


Report to Moderator

PostPosted: Thu Mar 28, 2019 8:28 am    Post subject: TD8E Steering Adjustment Reply to specific post Reply with quote

I have had issues with the right steering and had to adjust the external stud and lock nut several times. On an old forum I saw someone mention a internal adjustment and wondering if this is something I am needing to adjust as well as the external adjustment. About to run out of adjustment on the right track.
Any help is appricated
 
Back to top
View user's profile
MSM
Tractor Expert


Joined: 05 Jun 1999
Posts: 2116


Report to Moderator

PostPosted: Thu Mar 28, 2019 2:06 pm    Post subject: Re: TD8E Steering Adjustment Reply to specific post Reply with quote

If you have to keep adjusting the right brake it is possible the brake lining is breaking up causing constant adjustment or you always work off of the right side and use the brake to steer instead of just releasing the clutch and let the load on the blade help you steer. As far as I know there is no second adjustment, just the lock nut and screw. Hopefully you haven't damaged the brake disc . I would replace the brake sooner rather than later. Brake is replaced from the top, no need to break the track or remove the final. Unbolt the assembly from the trans side and the final pinion side, and lift it out.A service manual is your friend.
 
Back to top
View user's profile
granite
New User


Joined: 28 Mar 2019
Posts: 2


Report to Moderator

PostPosted: Fri Mar 29, 2019 4:30 am    Post subject: Re: TD8E Steering Adjustment Reply to specific post Reply with quote

Thanks a bunch, Should have the manuals for this tractor today, this my clear things up a bit.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters