Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Case International 255 Clutch issue


 
Post new topic    
View previous topic :: View next topic  
Author Message
5 Forward
Regular


Joined: 02 Mar 2013
Posts: 51


Report to Moderator

PostPosted: Sat Apr 27, 2019 6:12 am    Post subject: Case International 255 Clutch issue Reply to specific post Reply with quote

Has anyone ever changed the clutch and pressure plate on a Case International 255. It is a small compact tractor vintage around the mid 80's..Mitsubishi 3 cylinder diesel.
A friend has broken his apart and did not pay attention to the direction the clutch disc was facing. Flat side toward the engine or vice versa.. I always thought the flat side faced the engine. The illustrated parts break down indicates the flat side to the transmission.
 
Back to top
View user's profile
MARK ROBKE
Tractor Expert


Joined: 12 Jun 2010
Posts: 2411


Report to Moderator

PostPosted: Sat Apr 27, 2019 9:39 am    Post subject: Re: Case International 255 Clutch issue Reply to specific post Reply with quote

Every clutch disc that I have replaced-the springs in the disc will face the rear. Or the 'thicker' side faces rear. Usually the springs will catch on the flywheel bolts if installed backwards(facing front). Also it's a real good idea to have the flywheel turned. Mark.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters