Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

G706 brake discs


 
Post new topic    
View previous topic :: View next topic  
Author Message
plowhand
Regular


Joined: 04 Jan 2011
Posts: 253


Report to Moderator

PostPosted: Mon Aug 05, 2019 8:40 am    Post subject: G706 brake discs Reply to specific post Reply with quote

I took apart my brakes they were seized got em working lot of meat left on discs I cleaned everything up with wire brush they dont work that good have to stand on brakes to get any stopping power.
 
Back to top
View user's profile
molinegb
Tractor Expert


Joined: 13 Feb 2005
Posts: 2567


Report to Moderator

PostPosted: Mon Aug 05, 2019 9:09 am    Post subject: Re: G706 brake discs Reply to specific post Reply with quote

Actuators working right?
 
Back to top
View user's profile
plowhand
Regular


Joined: 04 Jan 2011
Posts: 253


Report to Moderator

PostPosted: Mon Aug 05, 2019 9:38 am    Post subject: Re: G706 brake discs Reply to specific post Reply with quote

As far as I know I set the brakes up there is resistance there I have discs in right position.zIs there a way to put the actuators in backwards?
 
Back to top
View user's profile
Curt Cooke
Long Time User


Joined: 16 Sep 2008
Posts: 901


Report to Moderator

PostPosted: Mon Aug 05, 2019 12:40 pm    Post subject: Re: G706 brake discs Reply to specific post Reply with quote

Couple things. If you want them to work like they were new, have all the braking surfaces re-surfaced at a machine shop. It's the same as having a flywheel re-surfaced. The other thing is that disks have a tendency to become oil soaked. If that's the case, you can gain some ground by teasing them with a torch to flash off the oil and grease.
 
Back to top
View user's profile
molinegb
Tractor Expert


Joined: 13 Feb 2005
Posts: 2567


Report to Moderator

PostPosted: Tue Aug 06, 2019 6:43 am    Post subject: Re: G706 brake discs Reply to specific post Reply with quote

Wouldn't set up if actuators or discs worn out. Are the steel ball good?
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Minneapolis Moline All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters