Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

530 CK forklift


 
Post new topic    
View previous topic :: View next topic  
Author Message
minnemoblb
Regular


Joined: 25 Mar 2012
Posts: 46


Report to Moderator

PostPosted: Sun Sep 08, 2019 1:25 pm    Post subject: 530 CK forklift Reply to specific post Reply with quote

New to the case world and have a couple questions for the experts. I picked up a 530 forklift a while back to use around the place and need to address a few issues on it this winter. 1st it?s a 4cyl gas engine what size engine would it be and what is available for parts for an overhaul? Is it a sleeved engine or not?
2nd are parts readily available for the brakes? Have a leak coming from one of the brake housings that I?ll be addressing.
3rd there?s a lever on the right side below the gas tank shifting it changes ground speed is this torque shift on the go type deal or a hi/low range?
I?m totally new to cases of that era so any info would be great. I?d also like to find some original parts and repair manuals if anyone has any they?d sell.
 
Back to top
View user's profile
chuck machinist
Tractor Expert


Joined: 05 Jul 2011
Posts: 3101
Location: chesapeake va.

Report to Moderator

PostPosted: Sun Sep 08, 2019 1:42 pm    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

John Saeli 315-585-9826 he should be able to handle every one of your needs that you were in question of CM
 
Back to top
View user's profile
Case Nutty 1660
Tractor Guru


Joined: 08 Mar 2011
Posts: 14784


Report to Moderator

PostPosted: Sun Sep 08, 2019 2:26 pm    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

engine is a G159 wet sleeve, brake parts are no problem,, I will assume you have a dry clutch unit and not a Case-O-Matic, but both types have dual range,, sounds like you are talking about a hi/lo range lever, manuals are available,, thi site may sell them, on the web at times and your local CASE CE(Not cih though) dealer can order them also,, I am guessing its the one posted on my CASE fb page,, they are great units Congrats
cnt
 
Back to top
View user's profile
Joe (Wa)
Tractor Expert


Joined: 01 Jan 1999
Posts: 2542


Report to Moderator

PostPosted: Sun Sep 08, 2019 4:24 pm    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

Parts manuals.

Joe
https://partstore.casece.com/us/parts search.html epc::mr62280

https://partstore.casece.com/us/parts search.html epc::mr57866

 
Back to top
View user's profile
minnemoblb
Regular


Joined: 25 Mar 2012
Posts: 46


Report to Moderator

PostPosted: Sun Sep 08, 2019 6:01 pm    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

Thanks for the replies and links to the parts books.
Yes it?s a dry clutch not case o Matic. I don?t do Facebook so I doubt that?s mine on there. I don?t know how I ever got along without the 530, it?s lifting capacity is impressive. Thanks again.
 
Back to top
View user's profile
Case Nutty 1660
Tractor Guru


Joined: 08 Mar 2011
Posts: 14784


Report to Moderator

PostPosted: Mon Sep 09, 2019 6:35 am    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

Sorry for the confusion then,, the one posted on fb was the mans son posting it,, I assumed and was wrong,, ops,, I have been hunting a CASE forklift in my price range since we sold out the Case dealership in 1976
 
Back to top
View user's profile
cskent
Regular


Joined: 24 Aug 2007
Posts: 148


Report to Moderator

PostPosted: Tue Sep 10, 2019 3:27 pm    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

the shifter on right side looking towards the engine from the seat is a range shift lever towards you it is direct drive pushed forward it is either low or high depends on the option. could be a two or three speed trany. I use local case ih ag dealer but use a parts guide and have been fine getting parts that way. get an operators manual for it, if this site does not have you can get reprints. as has been mentioned John is a great source. I recently picked up the backhoe version of the same model, but in diesel, no regrets so far. if your model number ends in tc you have the torque converter option. I also have an eye out for the forklift model. parts should not be a problem.
 
Back to top
View user's profile
minnemoblb
Regular


Joined: 25 Mar 2012
Posts: 46


Report to Moderator

PostPosted: Wed Sep 11, 2019 6:00 am    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

No problem. My 530 might be for sale in the future, I?ve got a 586c bought from a neighbor that has a free lift mast and side shift but needs major work and might not be worth fixing.
 
Back to top
View user's profile
Case Nutty 1660
Tractor Guru


Joined: 08 Mar 2011
Posts: 14784


Report to Moderator

PostPosted: Wed Sep 11, 2019 9:17 am    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

Boy a 586 is just what I need I assume you are far away form me though to make it feasible to transport as I am in NE Wyoming
 
Back to top
View user's profile
minnemoblb
Regular


Joined: 25 Mar 2012
Posts: 46


Report to Moderator

PostPosted: Wed Sep 11, 2019 10:21 am    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

NW Indiana probably be to costly on trucking. The 586 has had a rough life brakes went out then was ?stopped? with the reverser until it finally quit moving all together and was pushed off into the corner of the shed.
 
Back to top
View user's profile
Case Nutty 1660
Tractor Guru


Joined: 08 Mar 2011
Posts: 14784


Report to Moderator

PostPosted: Wed Sep 11, 2019 10:53 am    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

for me those are not hard to fix,, but I would guess it would be at least 2000.00 plus to haul it here bummer
 
Back to top
View user's profile
minnemoblb
Regular


Joined: 25 Mar 2012
Posts: 46


Report to Moderator

PostPosted: Wed Sep 11, 2019 11:55 am    Post subject: Re: 530 CK forklift Reply to specific post Reply with quote

I?m confident in my ability to fix it despite my lack of experience with case equipment. For the right Moline I could make a trip to Wyoming. My email should be open if you think you might be interested in it.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters