Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Ford 841


 
Post new topic    
View previous topic :: View next topic  
Author Message
grizgrin
New User


Joined: 05 Oct 2019
Posts: 1


Report to Moderator

PostPosted: Sun Oct 06, 2019 6:14 am    Post subject: Ford 841 Reply to specific post Reply with quote

Looking for help with an old 19-97 loader on my 841. Cylinders need rebuilt badly, trying to get them apart and it's not happening. One is different from the other, looks like maybe change in OEM equipment over the years and a replacement went on. The one I am working on has a circlip on the end, which is now out, the 90 degree fitting is out, and the endcap (along with a few V packing rings) is loose and slid down the rod to the crosstube. Wont come apart.





 
Back to top
View user's profile
riveroadrat
Tractor Expert


Joined: 26 Nov 2013
Posts: 1611


Report to Moderator

PostPosted: Mon Oct 14, 2019 5:05 pm    Post subject: Re: Ford 841 Reply to specific post Reply with quote

Are those the screw on ends? One is dirty or welded. You might need a torch to get them loose. Some shop are very reasonable in my area but there are those who don't know what they are doing and charge an arm and a leg for messing up a good pair of cylinders.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters