Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Ford emblem


 
Post new topic    
View previous topic :: View next topic  
Author Message
Wheat47
Long Time User


Joined: 28 May 2005
Posts: 700


Report to Moderator

PostPosted: Thu Oct 24, 2019 9:35 am    Post subject: Ford emblem Reply to specific post Reply with quote

I recently acquired a Ford 861 (or 41?) with a diesel engine and loader. Pretty decent shape.
As always with "new" tractors it needs a bit of attention. It is missing the front hood emblem.
I am wondering what is the correct one. Rest of sheet metal is good. The loader is plumbed in the
three point hydraulics. To lift the loader, you pull the 3 pt. lever up, and push it down to lower.
It has a trip to dump the bucket. My plan is in time to put a front pump on the motor to get away
from using the 3 pt. hyds.
 
Back to top
View user's profile
Sean in PA
Tractor Guru


Joined: 27 Feb 2008
Posts: 8418
Location: Southeast PA

Report to Moderator

PostPosted: Thu Oct 24, 2019 9:45 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

Quote:
I recently acquired a Ford 861 (or 41?)


An 861 has a 5 speed transmission with live PTO. An 841 has a 4 speed transmission with non-live PTO. There was also an 851 which had the 5 speed with non-live PTO. The front badge should look like this:


 
Back to top
View user's profile
Wheat47
Long Time User


Joined: 28 May 2005
Posts: 700


Report to Moderator

PostPosted: Thu Oct 24, 2019 9:51 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

Thanks for the quick reply.
I will check later today to double check the model.
 
Back to top
View user's profile
Wheat47
Long Time User


Joined: 28 May 2005
Posts: 700


Report to Moderator

PostPosted: Thu Oct 24, 2019 11:03 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

Just checked the tractor. I think the Ser. # is 2171,
which would make it a 1957 year.
Need to wire brush it to be sure.
It is an 861 Powermaster, diesel,
according to the decals and all.
It does have the 5-speed and the 2-stage clutch.
 
Back to top
View user's profile
showcrop
Tractor Guru


Joined: 13 Dec 2000
Posts: 27193
Location: Chester NH

Report to Moderator

PostPosted: Thu Oct 24, 2019 3:09 pm    Post subject: Re: Ford emblem Reply to specific post Reply with quote


Wheat, the emblem that you want is sold here at YT.
 
Back to top
View user's profile
Wheat47
Long Time User


Joined: 28 May 2005
Posts: 700


Report to Moderator

PostPosted: Thu Oct 24, 2019 3:15 pm    Post subject: Re: Ford emblem Reply to specific post Reply with quote

OK....Thanks.
 
Back to top
View user's profile
961pm
Regular


Joined: 06 Dec 2015
Posts: 54


Report to Moderator

PostPosted: Thu Oct 24, 2019 4:43 pm    Post subject: Re: Ford emblem Reply to specific post Reply with quote

I disagree with Sean in pa. The pic is showing the 601/701 Workmaster Badge with the black outer ring. 801/901 series are Power Master, which have the chrome outer ring.
 
Back to top
View user's profile
Ultradog MN
Tractor Guru


Joined: 22 Apr 2001
Posts: 25315
Location: Twin Cities

Report to Moderator

PostPosted: Fri Oct 25, 2019 1:42 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

58-62 800?
 
Back to top
View user's profile
Tim PloughNman Daley
Tractor Expert


Joined: 18 Sep 2004
Posts: 3456


Report to Moderator

PostPosted: Fri Oct 25, 2019 1:58 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

NOT my ad... "58-62 - 801, 901" as advertised. SA
 
Back to top
View user's profile
Kirk-NJ
Tractor Guru


Joined: 10 Dec 2006
Posts: 5588


Report to Moderator

PostPosted: Sat Oct 26, 2019 1:17 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

Sean posted the correct badge for your 801
 
Back to top
View user's profile
961pm
Regular


Joined: 06 Dec 2015
Posts: 54


Report to Moderator

PostPosted: Sun Oct 27, 2019 3:57 am    Post subject: Re: Ford emblem Reply to specific post Reply with quote

Wheatland47,
These badges or emblems are confusing because they are all interchangeable. If someone lost or damaged one, they may have replaced it with one that was readily available, whether it was correct or not. How many tractors do we see, called Jubilee, because that is what the emblem is, so it most be correct.
"That's the badge grandpa's tractor had on it, so it must be right"
As stated earlier, this site has the badges listed for sale. Toward the top are the emblems for 501/601/701. Further down are the ones for 801/901.
You can also check out Dennis Carpenter's site, known for high quality, factory spec parts.
New Holland's site is a bit more confusing. They only have 1 badge listed, as far as I can tell, for all 01 series tractor, which is the Work Master badge. But notice it just lists 501/601/701.
Don't take my word for this, or anyone else's on this site. Do your homework, and make your own decision!
 
Back to top
View user's profile
Wheat47
Long Time User


Joined: 28 May 2005
Posts: 700


Report to Moderator

PostPosted: Sun Oct 27, 2019 12:22 pm    Post subject: Re: Ford emblem Reply to specific post Reply with quote

Thanks, everyone, for all the replies.
I'm getting closer to finding the right one.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters