Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Looking for a Case-O-Matic.


 
Post new topic    
View previous topic :: View next topic  
Author Message
L.Fure
Tractor Expert


Joined: 17 Jun 2013
Posts: 3121


Report to Moderator

PostPosted: Tue Dec 17, 2019 4:42 pm    Post subject: Looking for a Case-O-Matic. Reply to specific post Reply with quote

I have it in my head to buy another C-O-M tractor. I started out looking for a 411B like I had around 30 years ago, but have now decided a 530 with C-O-M or 611B would be fine too.. I've been searching Craigslist for several months, but only found one 611B that didn't have power steering. Power steering is a must since I want to put the 291 loader from my 530 on it. There is a 530 C-O-M on Craigslist but it's a trailer queen with a matching price tag. Any other options out there I could use my loader on other than what I listed. Or does anyone have a 530 or 611B they have been thinking about selling. I'm located in the SW corner of Wisconsin.
 
Back to top
View user's profile
comfortking
Regular


Joined: 10 Jun 2000
Posts: 382


Report to Moderator

PostPosted: Tue Dec 17, 2019 7:45 pm    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

Call me. two17 343 nine six five eight
 
Back to top
View user's profile
L.Fure
Tractor Expert


Joined: 17 Jun 2013
Posts: 3121


Report to Moderator

PostPosted: Wed Dec 18, 2019 5:21 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

CVPost-comfortking wrote:
(quoted from post at 04:45:54 12/18/19) Call me. two17 343 nine six five eight


When's a good time to call you?
 
Back to top
View user's profile
Farmer Rock
Long Time User


Joined: 18 Oct 2019
Posts: 597


Report to Moderator

PostPosted: Wed Dec 18, 2019 5:23 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

hi,i know this doesn't help much,but in my area(south central pa)i know of a 530ck loader/backhoe for 800 dollars and not in bad shape for a ck,point is that you just need to do some snooping down country roads,and around here there are a ton of old case tractors,rock
 
Back to top
View user's profile
Lazy WP
Tractor Expert


Joined: 28 Jan 2012
Posts: 1870


Report to Moderator

PostPosted: Wed Dec 18, 2019 6:31 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

Can you get me a phone number for the loader and backhoe? For $800 I will drag a trailer back there this spring when we go on vacation.
 
Back to top
View user's profile
Joe (Wa)
Tractor Expert


Joined: 01 Jan 1999
Posts: 2971


Report to Moderator

PostPosted: Wed Dec 18, 2019 8:59 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

L.Fure wrote "Any other options out there I could use my loader on other than what I listed"



 
Back to top
View user's profile
L.Fure
Tractor Expert


Joined: 17 Jun 2013
Posts: 3121


Report to Moderator

PostPosted: Wed Dec 18, 2019 9:52 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

CVPost-Joe (Wa) wrote:
(quoted from post at 17:59:03 12/18/19) L.Fure wrote "Any other options out there I could use my loader on other than what I listed"


<img src="/cvphotos/cvphoto187.jpg">


Thanks Joe. I see it list the 630 but not the 611B. I wonder why the 611B was excluded?
 
Back to top
View user's profile
kenbob
Long Time User


Joined: 22 Nov 2017
Posts: 947


Report to Moderator

PostPosted: Wed Dec 18, 2019 10:53 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

The case site on facebook has a 430 with cop just posted
 
Back to top
View user's profile
Joe (Wa)
Tractor Expert


Joined: 01 Jan 1999
Posts: 2971


Report to Moderator

PostPosted: Wed Dec 18, 2019 10:59 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

L.Fure wrote:
(quoted from post at 18:52:30 12/18/19)
CVPost-Joe (Wa) wrote:
(quoted from post at 17:59:03 12/18/19) L.Fure wrote "Any other options out there I could use my loader on other than what I listed"


<img src="/cvphotos/cvphoto187.jpg">


Thanks Joe. I see it list the 630 but not the 611B. I wonder why the 611B was excluded?


I think that list just excludes the COM tractors although some of them can be either dry clutch or COM.

Joe
 
Back to top
View user's profile
Farmer Rock
Long Time User


Joined: 18 Oct 2019
Posts: 597


Report to Moderator

PostPosted: Wed Dec 18, 2019 5:12 pm    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

hi (lazy wp) i emailed you the guy's contact information
 
Back to top
View user's profile
RonSa
Regular


Joined: 01 Dec 2006
Posts: 191


Report to Moderator

PostPosted: Thu Dec 19, 2019 6:46 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

A torque converter is a great device in the powertrain for loader applications. It has great crowd-the-pile torque multiplication. It is great for shuttle work in general. It is durable. It is smooth. Its shortcomings are insignificant for shuttling and crowing the pile.

Therefore, keep looking for a COM for a loader tractor-----and most PTO work.
 
Back to top
View user's profile
L.Fure
Tractor Expert


Joined: 17 Jun 2013
Posts: 3121


Report to Moderator

PostPosted: Thu Dec 19, 2019 8:19 am    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

CVPost-RonSa wrote:
(quoted from post at 15:46:56 12/19/19) A torque converter is a great device in the powertrain for loader applications. It has great crowd-the-pile torque multiplication. It is great for shuttle work in general. It is durable. It is smooth. Its shortcomings are insignificant for shuttling and crowing the pile.

Therefore, keep looking for a COM for a loader tractor-----and most PTO work.


I agree completely. That's the one thing I miss about the 411B I used to own. The other thing my 411B had was a foot throttle on the left side under the inching peddle. It really worked well with the C.O.M. I'll probably have to fabricate one for the next C.O.M tractor I buy since I don't think the left side foot throttle was very common.
 
Back to top
View user's profile
hoghollow
Regular


Joined: 06 Aug 2015
Posts: 161


Report to Moderator

PostPosted: Thu Dec 19, 2019 2:04 pm    Post subject: Re: Looking for a Case-O-Matic. Reply to specific post Reply with quote

know of 530 case not sure if it is a com or not. This tractor sits about 30 miles
from you in southwest Wi It is sitting in shed for last 4 or 5 years. Give me a email
with your phone number and i can give you more details.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters