Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

tw30 dual power


 
Post new topic    
View previous topic :: View next topic  
Author Message
martinrepair
New User


Joined: 12 Mar 2015
Posts: 7


Report to Moderator

PostPosted: Wed Jan 29, 2020 8:55 am    Post subject: tw30 dual power Reply to specific post Reply with quote

Rebuilt tw30 dual power it still wants to slip in low range and the oil pressure is at 240psi a little history this thing ran with it screwed up for a long time just wondering if it is possible for the piston in low not to be as thick as it should be or has the seal rings still let oil go past
 
Back to top
View user's profile
martinrepair
New User


Joined: 12 Mar 2015
Posts: 7


Report to Moderator

PostPosted: Wed Jan 29, 2020 2:04 pm    Post subject: Re: tw30 dual power Reply to specific post Reply with quote

what is the duel power pressure suppose to be on the tw30
 
Back to top
View user's profile
bobwhitecar
Regular


Joined: 02 Aug 2019
Posts: 60


Report to Moderator

PostPosted: Wed Jan 29, 2020 3:47 pm    Post subject: Re: tw30 dual power Reply to specific post Reply with quote

engine running at 2200 in direct in dual power pressure is 185-235
 
Back to top
View user's profile
martinrepair
New User


Joined: 12 Mar 2015
Posts: 7


Report to Moderator

PostPosted: Wed Feb 12, 2020 6:27 pm    Post subject: Re: tw30 dual power Reply to specific post Reply with quote

the dealer sold me the wrong plates for low side. They gave me the plates for the early and smaller models of the tw so after a lot of head scratching finally got it working right.
 
Back to top
View user's profile
showcrop
Tractor Guru


Joined: 13 Dec 2000
Posts: 30309
Location: Chester NH

Report to Moderator

PostPosted: Thu Feb 13, 2020 5:34 am    Post subject: Re: tw30 dual power Reply to specific post Reply with quote

CVPost-martinrepair wrote:
(quoted from post at 19:27:04 02/12/20) the dealer sold me the wrong plates for low side. They gave me the plates for the early and smaller models of the tw so after a lot of head scratching finally got it working right.



That is good to know about! Thanks for posting back.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters