Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

1952ar shift fork replacement


 
Post new topic    
View previous topic :: View next topic  
Author Message
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Fri Mar 20, 2020 2:46 pm    Post subject: 1952ar shift fork replacement Reply to specific post Reply with quote

Hello! I need to replace the shift fork on my 1952ar John Deere. I ve removed the clutch internals but the clutch housing cylinder only come 3/4 of an inch out and no further. How does it come the rest of the way off?
 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Sun Mar 22, 2020 5:12 am    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

Lynn Opperman wrote:
(quoted from post at 23:46:42 03/20/20) Hello! I need to replace the shift fork on my 1952ar John Deere. I ve removed the clutch internals but the clutch housing cylinder only come 3/4 of an inch out and no further. How does it come the rest of the way off?


I said shift fork but it s the clutch fork. Same issue is that I can t get the clutch cylinder off.
 
Back to top
View user's profile
Mark-Ia
Tractor Guru


Joined: 29 Jan 2011
Posts: 4655


Report to Moderator

PostPosted: Sun Mar 22, 2020 5:34 am    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

A little wiggling up and down and it should come out. Sometimes the bolts that hold the brass fork to the yoke will get caught on the housing.
 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Sun Mar 22, 2020 6:26 am    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

clutch shaft fork
 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Sun Mar 22, 2020 11:34 am    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote


Hi Mark. Thanks for responding. So the clutch cylinder / drum just slides off the shaft with a little wiggling? I was afraid to put any pressure on it because it felt like it was hitt something about 3/4 of an inch from its running position.
 
Back to top
View user's profile
Mark-Ia
Tractor Guru


Joined: 29 Jan 2011
Posts: 4655


Report to Moderator

PostPosted: Sun Mar 22, 2020 2:55 pm    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

This pulley is on a D, but still the same. Remove the 4 bolts and pull the clutch fork from the pulley, the pulley will than slide off.

 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Sun Mar 22, 2020 3:16 pm    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote


I had removed the 4 bolts at the start hoping that s all I needed to remove but it only comes away a little as well. So as I was looking at the fly out diagram I see there is a snap ring holding the shaft in place so surmised I had to go through the clutch to possibly get to the internals. That s when I ran into the clutch barrel issue.
 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Sun Mar 22, 2020 3:52 pm    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

Thanks ever so much for your help. I ll try removing the bolts and hopefully that will work. I ll keep you posted.
 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Thu Mar 26, 2020 6:47 am    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

Thanks for your help. I got the clutch shaft out and the replacement in but have to redo it because I think I have to realign the slides one more over. I m sure I m on the right track.
 
Back to top
View user's profile
Lynn Opperman
New User


Joined: 05 Oct 2011
Posts: 10


Report to Moderator

PostPosted: Thu Mar 26, 2020 6:48 am    Post subject: Re: 1952ar shift fork replacement Reply to specific post Reply with quote

Shaft splines
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Restoration and Repair Tips All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters