Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Re: Which Boom Pole?


 
Post new topic    
View previous topic :: View next topic  
Author Message
Tim PloughNman Daley
Tractor Guru


Joined: 18 Sep 2004
Posts: 3647


Report to Moderator

PostPosted: Tue Aug 11, 2020 4:41 am    Post subject: Re: Which Boom Pole? Reply to specific post Reply with quote

The length of a boom has depends on how high the 3-Pt lift will go. A bigger issue is how to keep the front end down so it doesn't come off the ground when lifting an implement. I'd add 16" from wheels and tires with the 2-PC wheel weights AND some extra weight hanging off the bumper. The N will lift most implements like plows, discs, cultivators, but don't plan on a Grain Drill, Combine, Picker, or Baler. I suggest to set boom top link to the shortest setting possible, attach Stabilizer Bars, and GO SLOW. You MIGHT be able to lift it into your pickup bed. Roll overs are the single most cause of accidents as fellas don't know how to lift or haul logs correctly. Pulling/hailing logs and other items is done properly from below the PTO shaft.

FORD TRACTOR OPERATOR SAFETY:







 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford 9N, 2N, 8N All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters