Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

035 moves VERY slow in 2nd gear


 
Post new topic    
View previous topic :: View next topic  
Author Message
Ted Topping
New User


Joined: 18 Oct 2020
Posts: 1


Report to Moderator

PostPosted: Sun Oct 18, 2020 8:07 am    Post subject: 035 moves VERY slow in 2nd gear Reply to specific post Reply with quote

Hi, my MF 035 Perkins moves very slow in second gear, high range, not at all in any other gear. Appears to shift properly and seems like it wants to move but does not....can you help ?
 
Back to top
View user's profile
Dieseltech
Tractor Guru


Joined: 29 Feb 2012
Posts: 9302
Location: Indiana

Report to Moderator

PostPosted: Sun Oct 18, 2020 9:27 am    Post subject: Re: 035 moves VERY slow in 2nd gear Reply to specific post Reply with quote

Clutch slipping? Makes no sense as other gears should do SOMETHING..
 
Back to top
View user's profile
DavidP,South Wales
Long Time User


Joined: 03 May 2009
Posts: 928
Location: Wales, UK

Report to Moderator

PostPosted: Sun Oct 18, 2020 10:41 am    Post subject: Re: 035 moves VERY slow in 2nd gear Reply to specific post Reply with quote

Hi, I agree with Dieseltech. It doesn’t make sense to have only the
vaguest drive in H2. A slipping clutch has to be the prime candidate
but going into a lower gear should make it easier for a slipping clutch
to at least provide some sort of movement. I would suggest that you
remove the underside inspection plate to start. Have an assistant
operate the clutch when needed. Using a large screwdriver or similar
turn the flywheel and operate the clutch. Look for any variation on the
gaps at the PTO adjuster screws. Observe the amount that the main
pressure plate moves rear wards at different points during clutch
operation. Please confirm that this tractor is not Multi-Power. Check
the ‘feel’ of both gear levers in all movements. Listen for the gears
‘clonking’ when they engage normally. Let us know what you find.
DavidP,South Wales
 
Back to top
View user's profile Yahoo Messenger
:   
Post new topic    Yesterday's Tractors Forum Index -> Massey Harris & Massey Ferguson All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters