Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Case 580D schuttle replacing


 
Post new topic    
View previous topic :: View next topic  
Author Message
herald h ia
Regular


Joined: 28 Apr 2018
Posts: 26


Report to Moderator

PostPosted: Fri Jan 08, 2021 2:39 pm    Post subject: Case 580D schuttle replacing Reply to specific post Reply with quote

How hard is it to remove and replace the shuttle transmission on a 580 D backhoe. Mine is getting weaker and weaker. Changed oil and no difference. Done with tiling till spring so
thought we could work on it this winter. Tractor is in very good shape other than that Got a heated shop, so we'll try and work on it. Closest case construction shop is 125 miles
away, and agriculture shop don't want to work on it.
 
Back to top
View user's profile
mjsnodgrass
Regular


Joined: 07 Sep 2007
Posts: 495


Report to Moderator

PostPosted: Fri Jan 08, 2021 10:23 pm    Post subject: Re: Case 580D schuttle replacing Reply to specific post Reply with quote

i have a 580E. the shuttle id bolted on engine like a normal transmission. pretty straight forward to remove. i used a transmission jack. if were 20 years younger i'd probably not bothered with the jack. shuttle is fairly heavy, but manageable. use your outriggers and something under the bucket to get machine high enough to get jack with shuttle out from under it. few hoses, few electrical connections and a driveline is all there is. good luck. if you're going to all the trouble to rebuild it, replace the torque converter as well.
 
Back to top
View user's profile
yellowcrawler
New User


Joined: 07 Jan 2007
Posts: 10


Report to Moderator

PostPosted: Tue Jan 12, 2021 4:21 pm    Post subject: Re: Case 580D schuttle replacing Reply to specific post Reply with quote

I removed the shuttle shift on my 580D, installed a rebuild kit and put it back in. Rather straight forward to remove and replace. With the manual as a guide, installing the rebuild kit was not bad. The clutches were worn out and the selector shaft was seriously damaged from previous work. That was about 10 years ago and has worked well since.
 
Back to top
View user's profile
herald h ia
Regular


Joined: 28 Apr 2018
Posts: 26


Report to Moderator

PostPosted: Wed Jan 13, 2021 3:13 pm    Post subject: Re: Case 580D schuttle replacing Reply to specific post Reply with quote

Thanks for the replies. Try and get started next month. Let you know how We did.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters