Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

723 backhoe 10-ft model cylinders seal kits


 
Post new topic    
View previous topic :: View next topic  
Author Message
paulchace
Regular


Joined: 30 Nov 2020
Posts: 38


Report to Moderator

PostPosted: Wed Jan 13, 2021 10:03 am    Post subject: 723 backhoe 10-ft model cylinders seal kits Reply to specific post Reply with quote

Is anybody aware of part number or
part numbers to replace the seals
and o-rings inside the crowd, lift,
bucket, stabilizer cylinders? Thank
you
 
Back to top
View user's profile
bc
Tractor Guru


Joined: 26 Aug 2007
Posts: 3770


Report to Moderator

PostPosted: Wed Jan 13, 2021 11:11 am    Post subject: Re: 723 backhoe 10-ft model cylinders seal kits Reply to specific post Reply with quote


I'm not aware but all these cylinders and rods are standard sizes but there are different types of seals and piston rubbers. The hydraulic shops will know but they will likely say they want to see the old ones. If you are paying 3 times the money then ford/NH dealer should be able to pull up the part number. If you want to pay double the money then go to your hydraulic dealer. If you want to pay a reasonable price then look online, ebag, etc. If you do a giggle search on your backhoe model followed by the cylinder type/size then the online dealers will show up and you will probably find the part numbers too. Good luck. I did a few and the first thing to figure out is how to get them apart and everything is heavy heavy on those big cylinders. You will probably need to leave one end hooked up so you have the leverage to unscrew them.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters