Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Wheel weight question


 
Post new topic    
View previous topic :: View next topic  
Author Message
Dave Westlund
Regular


Joined: 03 Oct 2009
Posts: 285
Location: Central Minnesota

Report to Moderator

PostPosted: Sat Jan 30, 2021 8:03 am    Post subject: Wheel weight question Reply to specific post Reply with quote

Will WD45 rear wheel weights bolt up on a series D15 Series II tractor? I believe the answer is no but not 100% sure.

I couldn't find an answer when doing searches.

Thanks for your responses here.
Dave
 
Back to top
View user's profile
David R Inman
Long Time User


Joined: 01 Aug 2012
Posts: 528


Report to Moderator

PostPosted: Sat Jan 30, 2021 9:07 am    Post subject: Re: Wheel weight question Reply to specific post Reply with quote

Don’t know for sure, but what wheels you have may
play in. Tractor Data says the D15 had 26” rims,
and the 45 had 28’s. Don’t know how much different
the two wheels are.

However, I do know that the wheels from a 45 will fit
a D15sII, that’s what dad has on his. When he got
the 15, it had some oddball tires and rims on it
(combine probably). When those wore out, he found
a set of 45 tires and wheels, put those on.
 
Back to top
View user's profile
Bob Bancroft
Tractor Guru


Joined: 05 Mar 2009
Posts: 9637
Location: Aurora NY

Report to Moderator

PostPosted: Sat Jan 30, 2021 10:10 am    Post subject: Re: Wheel weight question Reply to specific post Reply with quote

David pretty much covered it. The center section of the 26" wheel on the D14-15 is flat, unlike the WD/WD45/D17 28" wheel center section, which is curved. The later sectional/pie weights look similar, but will not interchange. I also fixed my D15II by installing 28" centers from a junk yard, and new 13" rims. I have an 82S side mounted mower on the right side, and three WD wheel weights on the left side.
 
Back to top
View user's profile
Nordic
Regular


Joined: 14 Dec 2015
Posts: 436


Report to Moderator

PostPosted: Sat Jan 30, 2021 11:01 am    Post subject: Re: Wheel weight question Reply to specific post Reply with quote

I took a wheel weight from WD that I put on my D14, I assume the D15 has the same 26" wheels as the D14. There is no center lining up on the D14/D15 rims but the bolt holes do line up and once you tighten up the bolts good and tight there is no movement.
 
Back to top
View user's profile
Dave Westlund
Regular


Joined: 03 Oct 2009
Posts: 285
Location: Central Minnesota

Report to Moderator

PostPosted: Thu Feb 04, 2021 4:22 am    Post subject: Re: Wheel weight question Reply to specific post Reply with quote


Thanks for the replies...
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters