Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

case 310f throttle linkage


 
Post new topic    
View previous topic :: View next topic  
Author Message
allfor45
New User


Joined: 04 May 2021
Posts: 4


Report to Moderator

PostPosted: Sat May 08, 2021 2:47 pm    Post subject: case 310f throttle linkage Reply to specific post Reply with quote

my throttle hand lever on dash has slowly quit working, its the cross shaft where the plate connects for the hand throttle I have it out it lose where flops back in forth doesn't move the shaft my question is how does this work foot peddle and governor are on the same cross shaft I hope this makes sense Thanks for all help.
 
Back to top
View user's profile
a1cnc
Regular


Joined: 27 Sep 2020
Posts: 45


Report to Moderator

PostPosted: Wed May 12, 2021 5:06 pm    Post subject: Re: case 310f throttle linkage Reply to specific post Reply with quote

Sounds like either the shaft has worn or the hole it goes into has worn.

I would buy or make some bushings to tighten up the wear if you can't replace what is worn
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters