Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

1550 Brake Progress


 
Post new topic    
View previous topic :: View next topic  
Author Message
super99
Tractor Guru


Joined: 19 Jan 2002
Posts: 6078
Location: Rock Island county, Ill

Report to Moderator

PostPosted: Fri Jun 18, 2021 3:44 am    Post subject: 1550 Brake Progress Reply to specific post Reply with quote

Finally got the stuck brake disc off!! I had to heat it several times, tap on it with a hammer, used the air chisel on it and candle wax 2 or 3 times and it finally moved. Pretty well destroyed the old disc getting it off. I was thinking wrong, there is a dust seal in front of the grease seal. I tried putting a screw in it and pop it out, but the screw just pulled out. After trying 3 progressively larger screws and making 3 holes in it, I heated it up and ran a self tapper in it and was able to get it out. The seal sets deep in the recess, I need to get a longer bit to drill and hole in it and a longer screw to put in it to get the old seal out. I got the nut off of the back of the Hydra Power. It wasn't very tight, I thought those were supposed to be tightened to like 250 or 300#'s?? I cleaned up the actuators, one side only had 3 balls in it instead of 5. I cleaned up the outside covers and the leaking side had a strip of orange silicon around it, imagine that!! Waiting on parts, the clutch and pressure plate are here but nothing else yet.







 
Back to top
View user's profile
J. Schwiebert
Tractor Guru


Joined: 27 Sep 2013
Posts: 5451


Report to Moderator

PostPosted: Sun Jun 20, 2021 11:34 am    Post subject: Re: 1550 Brake Progress Reply to specific post Reply with quote

Chris: Send me an e-mail. J.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters