Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

JD 214T Baler


 
Post new topic    
View previous topic :: View next topic  
Author Message
EWS
Regular


Joined: 11 Sep 2007
Posts: 67


Report to Moderator

PostPosted: Thu Jun 23, 2022 10:40 am    Post subject: JD 214T Baler Reply to specific post Reply with quote

A friends 214T needle lift link is worn out where it goes into the knotter wheel. He is wondering if the pin that goes into the knotter wheel can be built up with a weld and then ground down. He has a new bushing for the wheel as well. Is this link still available?
 
Back to top
View user's profile
Roger in Iowa
Tractor Expert


Joined: 12 Oct 2007
Posts: 3497
Location: Ottumwa, Iowa

Report to Moderator

PostPosted: Thu Jun 23, 2022 10:45 am    Post subject: Re: JD 214T Baler Reply to specific post Reply with quote

JDparts.com and if you select your local dealer you can see how much it costs.
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 94795
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Thu Jun 23, 2022 1:29 pm    Post subject: Re: JD 214T Baler Reply to specific post Reply with quote

I have a 14T and 214T parts baler that is likely to have that part still on them. E-Mail is open
 
Back to top
View user's profile
EWS
Regular


Joined: 11 Sep 2007
Posts: 67


Report to Moderator

PostPosted: Fri Jun 24, 2022 4:15 am    Post subject: Re: JD 214T Baler Reply to specific post Reply with quote

Do the 14T and 214T use the same part #?
 
Back to top
View user's profile
Tx Jim
Tractor Guru


Joined: 14 Feb 1999
Posts: 31683


Report to Moderator

PostPosted: Fri Jun 24, 2022 4:50 am    Post subject: Re: JD 214T Baler Reply to specific post Reply with quote

CVPost-EWS wrote:
(quoted from post at 07:15:40 06/24/22) Do the 14T and 214T use the same part #?


If you're referring to needle lift part that I' think you're referring to the answer is NO parts won't interchange between 214T & 14T. https://partscatalog.deere.com/jdrc/sidebyside/equipment/62615/referrer/navigation/pgId/56945
https://partscatalog.deere.com/jdrc/sidebyside/equipment/62615/referrer/navigation/pgId/63208
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 94795
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Fri Jun 24, 2022 6:54 am    Post subject: Re: JD 214T Baler Reply to specific post Reply with quote

I believe they do
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Implement Alley All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters