Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

new to me engine


 
Post new topic    
View previous topic :: View next topic  
Author Message
flembo
Tractor Expert


Joined: 12 Jun 2011
Posts: 3410
Location: Hancock New Hampshire

Report to Moderator

PostPosted: Mon Sep 19, 2022 7:51 am    Post subject: new to me engine Reply to specific post Reply with quote

I took my 8n to a engine meet Saturday and came home with this. A Fairbanks Morse 3 hp. Z 800 rpm. S/N SU 931917. I would like to know the age and any other info about this motor. I was told it hadn't been run in over 10 yrs. It has anti freeze in it and it rolls over smooth with good spark the gas tank is clean with no leaks. I spent some time cleaning and checking things over the governor rod moved freely valves open and close. After changing the oil I poured a little gas in the small chamber on the carburetor opened the needle valve about a turn and rolled it over, it started on the 6th try and smoked quite a bit until I turned the needle valve in a little it smoothed out and stopped smoking and ran well for several minutes. Now I know it runs I am back to cleaning both motor and cart. Thanks for any info you may share with me. flembo



 
Back to top
View user's profile
JMOR
Tractor Guru


Joined: 13 Aug 2007
Posts: 30043


Report to Moderator

PostPosted: Wed Sep 21, 2022 1:35 pm    Post subject: Re: new to me engine Reply to specific post Reply with quote

I really can't offer much, but replying since no one else did. From 1942 on for next 20 years, I lived next door to a cotton gin powered by a two cylinder FB engine just like the 3 cylinder pictured here, and an engine looking like yours was used to run an air compressor. The compressed air was used to start the big engine.

 
Back to top
View user's profile
flembo
Tractor Expert


Joined: 12 Jun 2011
Posts: 3410
Location: Hancock New Hampshire

Report to Moderator

PostPosted: Thu Sep 22, 2022 5:22 am    Post subject: Re: new to me engine Reply to specific post Reply with quote

Now that is an engine I guess they don't get hauled around to engine meets just for fun.
 
Back to top
View user's profile
warbaby
Tractor Expert


Joined: 21 Aug 2016
Posts: 2866


Report to Moderator

PostPosted: Wed Sep 28, 2022 6:35 am    Post subject: Re: new to me engine Reply to specific post Reply with quote

.....
Why not?

 
Back to top
View user's profile
Ande
Tractor Guru


Joined: 01 May 2006
Posts: 7331


Report to Moderator

PostPosted: Wed Nov 30, 2022 5:43 pm    Post subject: Re: new to me engine Reply to specific post Reply with quote

My guess without having my information close to me is a late and probably close to the last 1948
Untitled URL Link

 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Stationary Engines All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters