PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Removal of Control Shaft on Hydraulic Pump


 
Post new topic    
View previous topic :: View next topic  
Author Message
CaseKernel
New User


Joined: 25 Oct 2023
Posts: 3


Report to Moderator
PostPosted: Mon Nov 20, 2023 3:14 am    Post subject: Removal of Control Shaft on Hydraulic Pump Reply to specific post Reply with quote
(1949 VAC Case) I have my high pressure hydraulic pump removed, but do not need a complete disassemble. All I need is to remove the control pin to repack it. I have a leak at that shaft. The schematics show a packing washer and packing (Service Manual). Anyone know how to do this?? Service Manual does not tell how to do this part. The packing nut can be screwed out about a quarter inch and then butts up to the bronze part with the spring return for the control lever.
The pin must be removeable somehow. The bronze part must be a press fit on the shaft and resists removal. Don't want to force anything here, so seeking sage wisdom. (Pictured in the Service Manual on P. 131-32 #'s 4,5,6,7,8 ; Fig. C-243)
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters