Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

allis chalmer engine wc


 
Post new topic    
View previous topic :: View next topic  
Author Message
dan326
New User


Joined: 22 Oct 2009
Posts: 4


Report to Moderator

PostPosted: Thu Oct 22, 2009 4:24 pm    Post subject: allis chalmer engine wc Reply to specific post Reply with quote

My gramps has A-C and the water leaks in to oil it might be a seal or a crack in the block. So ive been looking around the net and from what ive found its an allis chalmer 1937 wc unstyled i was woundering what year engines would work in it and if they had to be from a wc only. thanks in advance for any info.
 
Back to top
View user's profile
MLPANKEY
Guest






Report to Moderator

PostPosted: Thu Oct 22, 2009 4:59 pm    Post subject: Re: allis chalmer engine wc Reply to specific post Reply with quote

a wc had a 201 cubic inch motor. a wd also had the 201 . a wd 45 d17 170 gas and e gleanor combine had a 226 cubic inch motor which will also fit.
 
Back to top
Aaron SEIA
Tractor Expert


Joined: 16 Dec 2003
Posts: 2558
Location: SE Iowa

Report to Moderator

PostPosted: Thu Oct 22, 2009 5:35 pm    Post subject: Re: allis chalmer engine wc Reply to specific post Reply with quote

Water in the oil is probably bad sleeve seals. Instead of swapping motors, why not rebuild what you've got? Parts are available and help is free here for the asking. Get a set of original AC manuals and maybe the I&T one as well and dive in. Simple to work on and might be a cheap fix.
Aaron SEIA
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 90648
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Thu Oct 22, 2009 5:56 pm    Post subject: Re: allis chalmer engine wc Reply to specific post Reply with quote

That could well be an easy fix or big problems. I have seen them have bad head gaskets, bad sleeve seals or a cracked head or block. I would open it up before you go looking for another engine. It should be the same engine as any WC or WD but not the WD45 but the WD45 engine will bolt right in just have more HP
 
Back to top
View user's profile
DickL
Tractor Expert


Joined: 02 Feb 2008
Posts: 1705


Report to Moderator

PostPosted: Fri Oct 23, 2009 9:50 am    Post subject: Re: allis chalmer engine wc Reply to specific post Reply with quote

Always the first place to look is the core plugs in the head under the rocker arms. You should see water in the recess but to make sure, top off the radiator and watch for water appear while putting a little air thru a rag into the radiator. If they set quite a while low on water it will speed up the plugs rusting thru.
 
Back to top
View user's profile
dan326
New User


Joined: 22 Oct 2009
Posts: 4


Report to Moderator

PostPosted: Sat Oct 24, 2009 4:46 pm    Post subject: Re: allis chalmer engine wc Reply to specific post Reply with quote

Will rebuild it if there nothing too wrong with it. I just wanted to just in case it is something we cant fix. Thanks for the info on the engines that will work guys. ps if i have any more ?'s i know who to call lol ghoustbusters! thanks again
 
Back to top
View user's profile
dan326
New User


Joined: 22 Oct 2009
Posts: 4


Report to Moderator

PostPosted: Sat Oct 24, 2009 4:48 pm    Post subject: Re: allis chalmer engine wc Reply to specific post Reply with quote

Will rebuild it if there nothing too wrong with it. I just wanted to know just in case it is something we cant fix. Thanks for the info on the engines that will work guys. ps if i have any more ?'s i know who to call lol ghoustbusters! thanks again
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters