Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

730 stuck in low range


 
Post new topic    
View previous topic :: View next topic  
Author Message
rainmaker4559
Guest






Report to Moderator

PostPosted: Sun Oct 24, 2010 6:16 pm    Post subject: 730 stuck in low range Reply to specific post Reply with quote

730 dual range wouldnt start having pulled started her many times before without this happening something got stuck somewhere in the low range side if you let the clutch out in low side in gear or not you will stall engine out the high side will shift all gears and move in them this tractor has cab on it so access will be difficult im hoping to be able to get at range shifter maybe forks popped out anybody ever have one get stuck in low side?
 
Back to top
INCase
Tractor Expert


Joined: 22 Jul 2002
Posts: 2444
Location: Indiana

Report to Moderator

PostPosted: Mon Oct 25, 2010 4:03 am    Post subject: Re: 730 stuck in low range Reply to specific post Reply with quote

I presume its a "2 stick" model.

Your post is a little hard to understand in: "........let the clutch out in low side in gear or not you will stall engine out the high side will shift all gears and move in them...."

Mine didn't get stuck per say. The roll pin that keeps the high-low shifter from rotating on its shaft broke and allowed the range sifter rail to rotate and then the shifter ball wouldn't engage it anymore and you couldn't move it. Its possible something like that happened to you and its in 2 gears when you move it to low range its not completely out of high range HOWEVER... I'm not sure if you can get the range shaft into 2 gears at the same time....

Regardless you'll have to pull the gas tank, steering column and shifter plate to get to the parts.

 
Back to top
View user's profile
mEl
Tractor Guru


Joined: 28 Sep 1998
Posts: 6119


Report to Moderator

PostPosted: Tue Oct 26, 2010 2:51 am    Post subject: Re: 730 stuck in low range Reply to specific post Reply with quote

Sounds to me like the gear has gaulded to the shaft and will take serious work and money to save the tractor. Does it drive with the shifter in neutral? I suspect the answer will be yes. Worst case you will have to cut the range gears out with a torch and replace the sliding gear shaft and any damaged range box parts. I have been down this road a few times and it aint pretty. The whole transmission and rear will require a thorough cleaning as cutting material will be everywhere. Hope I'm wrong for you and your wallets sake. mEl
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters