Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

D-15 with 92 tooth ringgear. What starter should go with it?


 
Post new topic    
View previous topic :: View next topic  
Author Message
C. H. Inman
New User


Joined: 05 Dec 2010
Posts: 1


Report to Moderator

PostPosted: Sun Dec 05, 2010 5:32 pm    Post subject: D-15 with 92 tooth ringgear. What starter should go with it? Reply to specific post Reply with quote

I bought a AC D15 With out a flywheel, but with a good engine, so I purchersed a salavge flywheel, and without further thought, split the tractor, and put it in and back together. I have since wiped out the bendix on the starter that came with the tractor. I counted the teeth on the ring gear, and there are 92. All infromation I have been able to find says the D15 had a 116 teeth flywheel. I do not beleive the salvage yard has the starter to go with the flywheel I have, so I ask, "What AC tractors had 92 tooth flywheels, or am I better off ordering a new 116 tooth flywheel, spliting the tractor, and changing the ring gear (I know I can w/o problem, allready split the tractor once, and have changed other ringgars before, but don't want to if I can get out of it) and the correct starter parts for it to fix the starter?" Thank you.
 
Back to top
View user's profile
DiyDave
Guest






Report to Moderator

PostPosted: Sun Dec 05, 2010 5:41 pm    Post subject: Re: D-15 with 92 tooth ringgear. What starter should go w... Reply to specific post Reply with quote

Series 1 or 2 D-15?
 
Back to top
chalmersbob(Pa)
Long Time User


Joined: 04 Jun 2009
Posts: 536


Report to Moderator

PostPosted: Sun Dec 05, 2010 7:09 pm    Post subject: Re: D-15 with 92 tooth ringgear. What starter should go w... Reply to specific post Reply with quote

The early D-14 has the 93 teeth ring gear. The later D-14 and all D-15 models have a 116 tooth ring gear. I just bought 1 for my D-15. I had a flywheel from an older D-14 that I thought I would use, but saw that it had the teeth were not the same. Bob
 
Back to top
View user's profile
pipe
Regular


Joined: 12 Jan 2008
Posts: 98
Location: Mi

Report to Moderator

PostPosted: Mon Dec 06, 2010 8:53 am    Post subject: Re: D-15 with 92 tooth ringgear. What starter should go w... Reply to specific post Reply with quote

I have a early d-14 stater for sale if needed also a matching flywheel but sounds like you just need the starter. 517-285-7883
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters